Loading ...
Loading ...
Loading ...
24
PROBLEM POSSIBLE CAUSE WHAT TO DO
Black or gray marks Aluminum utensils have • Remove marks with a mild, abrasive cleaner.
on dishes rubbed against dishes
Dishes do not dry HEAT/SMART DRY • Depending on model, select HEAT DRY
not selected or SMART DRY.
Rinse agent dispenser • Check the rinse agent dispenser.
is empty
Chef’s Washer is paused • To restart the wash cycle, press the selected
wash button.
Low inlet water • Run tap until water is hot prior to starting
Chef’s Washer cycle.
• Assure inlet water temperature is at
least 120°F.
• Depending on your model, select WATER
TEMP HIGH & HEAT DRY or WATER
TEMP SANI and HEAT DRY options.
Chef’s Washer won’t start Door not properly closed • Press door until it clicks shut.
Door opened during cycle • Re-latch door. Wait a few minutes; Chef’s
when water is hot Washer will restart automatically.
Child Lockout mode • Press and hold desired button for two
is selected seconds. See Child Lockout mode section
for models ZBD6905, ZBD 7005 and ZBD 7105.
Power supply not connected • Check that Chef’s Washer is plugged in and
switch is on.
All cycle status indicators Door not properly closed • Press door until it clicks shut.
flashing or beeping every
Chef’s Washer is paused • To restart the wash cycle, press the selected
30 seconds (on ZBD6905,
wash button.
ZBD 7005 and ZBD 7105)
Motor starts but water Water supply valve • Open water supply valve.
doesn’t enter Chef’s turned off
Washer (flashing POTS
LIGHT) (on models
ZBD 6905, ZBD 7005
and ZBD 7105)
Program taking too Low inlet water temperature • Run tap until water is hot prior to starting
long or not advancing Chef’s Washer cycle.
properly
• Allow time to heat water (up to one hour).
• Check inlet water temperature.
• Connect to hot water supply.
Questions?
Use this
problem
solver
Before You Call For Service
Chef’s Washer
Loading ...
Loading ...
Loading ...