Loading ...
Loading ...
Loading ...
433
uuWhen DrivinguBlind Spot Information (BSI) System
*
Driving
■ When the system detects a vehicle
1Blind Spot Information (BSI) System
*
Turn the system off when towing a trailer. The system
does not work properly for the following reasons:
• The added mass tilts the vehicle and changes the
radar coverage.
• The trailer itself can be detected by the radar
sensors, causing the BSI alert indicators to come on.
BSI may be adversely affected when:
• Objects (guard rails, poles, trees, etc,.) are detected.
• An object that does not reflect radio waves well,
such as a motorcycle, is in the alert zone.
• Driving on a curved road.
• A vehicle is moving from a far lane to the adjacent
lane.
• The system picks up external electrical interference.
• The rear bumper or the sensors have been
improperly repaired or the rear bumper has been
deformed.
• The orientation of the sensors has been changed.
• In bad weather (Heavy rain, snow, and fog).
For proper BSI operation:
• Always keep the rear bumper corner area clean.
• Do not cover the rear bumper corner area with
labels or stickers of any kind.
• Take your vehicle to a dealer if you need the rear
bumper corner area or the radar sensors to be
repaired, or the rear bumper corner area is strongly
impacted.
Comes on when:
●
A vehicle enters the alert zone from behind to
overtake you with a speed difference of no
more than 31 mph (50 km/h) from your
vehicle.
●
You pass a vehicle with a speed difference of
no more than 12 mph (20 km/h).
Comes On
BSI Alert Indicator: Located near the outside
door mirrors.
Blinks and the beeper sounds when:
You move the turn signal lever in the direction of the
detected vehicle. The beeper sounds three times.
Blinks
* Not available on all models
16 US ODYSSEY-31TK86500.book 433 ページ 2015年6月24日 水曜日 午後3時0分
Loading ...
Loading ...
Loading ...