Loading ...
Loading ...
Loading ...
Blind Hem Stitching 81
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
d
Fold back the fabric inside along the basting.
a Wrong side of fabric
b Edge of fabric
c Basting
d 5 mm (3/16 inch)
e
Unfold the edge of fabric, and position the
fabric with the wrong side facing up.
a Wrong side of fabric
b Basting
c Edge of fabric
f
Attach blind hem foot "R".
• For details on replacing the presser foot, refer
to "Replacing the presser foot" (page 43).
g
Select a stitch.
• For details, refer to "Selecting stitching" (page
49).
h
Remove the flat bed attachment and make
free-arm sewing possible.
• For details on free-arm sewing, refer to "Free-
arm sewing" (page 46).
i
Slide the part that you wish to sew onto the
arm, make sure that the fabric feeds correctly,
and then start sewing.
a Arm
j
Position the fabric with the edge of the folded
hem against the guide of the presser foot, and
then lower the presser foot lever.
a Wrong side of fabric
b Fold of hem
c Guide
k
Adjust the stitch width until the needle slightly
catches the fold of the hem.
a Needle drop point
When you change the needle drop point, raise
the needle, and then change the stitch width.
a Stitch width
1
2
1
3
4
S< Seen from the side>
1
1
2
3
1
1
S< Seen from the side>
R
a
1
R
c
b
R
1
a
Loading ...
Loading ...
Loading ...