Loading ...
Loading ...
Loading ...
6
Checking on power supply socket and power supply wire
The power supply of the refrigerator is provided with a three-wire (earthing) plug which
is accordant with three-wire (earthing) socket. Do not disassemble or cut off the third
pin (earthing) of the power supply wire in any case. The plug shall be available and
convenient to plug in or out.
The refrigerator should be connected to a socket which is dedicated for the fridge and be rated
at 10A. The refrigerator should not be plugged into a multibox as overloading may occur.
If the refrigerator shares a multifunctional socket with other electric appliances,
fire may be resulted if the wire heats up.
The refrigerator shall not be pushed hard against the plug top, this is to avoid damage
to the plug top.
Do not use the refrigerator if the wire or the plug is damaged and the plug is loosened, or
When being plugged or pulled out, the plug shall be held by hand, damage can be caused
can be caused.
Installation place
Avoid places with large humidity, since wire insulation can be aged and electricity leakage
can be caused.
When the refrigerator is installed, space shall be preserved around. Please see
installation requirement in “use preparation.”
Refrigerant (R600a)
Do not damage the refrigeration system of the refrigerator since the refrigerant is
Fire explosion may be resulted from spark at connection points of electric appliance if
refrigerant is leaked.
If pipeline of the refrigeration system is damaged or combustion gas leaks out, do not
Fire explosion can be resulted from spark when the plug is pulled out or plugged in, and
It is hazardous for anyone other than an Authorised Service Person to service this appliance.
In Queensland – the authorized Service Person MUST hold a Gas Work Authorisation for
hydrocarbon refrigerants, to carry out Servicing or repairs which involve the removal of covers.
Loading ...
Loading ...
Loading ...