Loading ...
Loading ...
Loading ...
Problem Possible Causes What To Do
Dishwasher won’t run Fuse is blown, or the • Replace fuse or reset circuit
circuit breaker tripped breaker. Remove any other
appliances from the circuit.
Door not latched • Close the door and push it
in to relatch.
Dial NOT set exactly • Turn the Dial to the
at desired wash cycle desired wash cycle.
Dishwasher leaks Improper installation • Review Installation
Instructions and install
properly.
Correct detergent • Use only automatic
wasn’t used dishwasher detergents.
Cascade
®
, Cascade
®
Complete
and Electrasol
®
Automatic
Dishwashing Detergents
have been approved for
use in all GE dishwashers.
Suds in the tub Correct detergent • Use only automatic
wasn’t used dishwasher detergents to
avoid sudsing. Cascade
®
,
Cascade
®
Complete and
Electrasol
®
Automatic
Dishwashing Detergents
have been approved for
use in all GE dishwashers.
• To remove suds from the tub,
open the dishwasher and let
suds evaporate. Add 1 gallon
of cold water to the tub. Close
and latch the dishwasher.
Pump out water by slowly
turning the Dial until a drain
period is reached. Repeat if
necessary.
Rinse agent was spilled • Always wipe up rinse agent
spills immediately.
Before you call for service…
Troubleshooting Tips
Review the charts on the following pages first and
you may not need to call for service.
Safety InstructionsOperating InstructionsTroubleshooting TipsConsumer Support
14
Loading ...
Loading ...
Loading ...