Loading ...
Loading ...
Loading ...
12 49-60820 Rev. 1
WARNING
To reduce the risk associated with choking, do not allow children under 3 years of age to have
access to small parts during the installation of this product. The disposable filter cartridge should be replaced every
6 months at the rated capacity, or sooner if a noticeable reduction in flow rate occurs.
For the maximum benefit of your filtration system, GE Appliances, a Haier company, recommends the use of GE
$SSOLDQFHVEUDQGHGILOWHUVRQO\8VLQJ*($SSOLDQFHVEUDQGHGILOWHUVLQ&DIpUHIULJHUDWRUVSURYLGHVRSWLPDOSHUIRUPDQFH
and reliability. Our filters meet rigorous industry NSF standards for safety and quality that are important for products
that are filtering your water. There is no assurance that brands other than GE Appliances filters meet our standards for
quality, performance and reliability.
If you have questions, or to order additional filter cartridges, visit gewaterfilters.com. In Canada, visit
cafeappliances.ca/service or consult the yellow pages for the nearest Camco Service Center.
Water Filter Cartridge - RPWFE
USING THE REFRIGERATOR: Water Filter Cartridge - RPWFE
Water Filter Cartridge
The water filter cartridge is located in the fresh food
interior on the left side wall, near the top.
Select models use radio frequency identification (RFID)
to detect leaks and monitor filter status. The RFID
technology is certified by the FCC.
When to Replace the Filter Cartridge
The filter cartridge should be replaced every six months
or earlier if 170 gallons (643.52 liters) of water has
been dispensed or the flow of water to the dispenser or
icemaker decreases.
Touch Screen Models: A filter status message will
appear on the screen when the water filter needs to be
replaced. The filter status will automatically update when
the filter is replaced.
Non-touch Screen Models: A filter indicator light will
illuminate on the screen when the water filter needs to
be replaced.
Removing the Filter Cartridge/Bypass Plug
1. Remove the old
cartridge or bypass plug
by opening the filter
door and pulling on the
bottom of the cartridge/
bypass plug to disengage it from the filter clips. Swing
the cartridge/bypass plug outward until you hear
the 'click' of the cartridge holder engaging with the
bracket.
2. Twist the cartridge/bypass plug one-quarter turn
counter-clockwise. After twisting, remove the cartridge/
bypass plug by pulling it away from the cartridge
holder. A small amount of water may drip out.
Installing the Filter Cartridge/Bypass Plug
1. Align the filter cartridge/bypass plug with the cartridge
holder with the word "FRONT" facing the top of the
unit. Push the cartridge/bypass plug toward the rear of
the unit until it is fully seated. Twist the filter cartridge/
bypass plug clockwise one-quarter turn, until the word
"FRONT" is facing outward.
2. While continuing to ensure cartridge/bypass plug is
fully seated in the holder, gently swing the filter inward
until it is in position. If filter will not swing easily, check
to ensure filter is properly aligned and fully seated
within the cartridge holder. The RED indicators should
not be visible.
NOTE: It is normal for water to appear discolored during
the initial system flush. Water color will return to normal
after first few minutes of dispensing.
Filter Bypass Plug
To reduce the risk of property damage due to water
leakage, you MUST use the filter bypass plug when
a replacement filter cartridge is not available. Some
models do not come equipped with the filter bypass
plug. To obtain a free bypass plug, visit us on-line
at cafeappliances.com/service. In Canada, visit
cafeappliances.ca/service. The dispenser and
icemaker will not operate without either the filter or the
bypass plug installed. The bypass plug is installed in the
VDPHZD\DVDILOWHUFDUWULGJH´
WARNING
SCALDING HAZARD.*
8VHRIWKHKRWZDWHUGLVSHQVHUSULRUWRSXUJLQJDLUIURP
the system may result in spurting of hot water and lead
to hot water scalding. Follow the instructions above to
purge all air from the system through the cold water
dispenser prior to using the hot water dispenser.
FCCID: ZKJ-EBX1532P001 ICID:
10229A-EBX1532P001
“This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.”
“This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.”
FRONT
3
4
Red indicators
should not be
visible
1
2
*Select Models Only
Loading ...
Loading ...
Loading ...