Loading ...
Loading ...
Loading ...
21
Care and Maintenance
Cleaning the Filters
Clean the lters and the spray arms regularly. Check if food residues are left on the
lters. If there are food residues on the lters, take them out and clean well under
running water. A dirty dishwasher will have
a negative e ect on the cleaning results.
• Remove the lower rack from the machine.
• Turn the coarse lter counterclockwise to the left and pull it out in an upward direction A.
• Pull out the metal/plastic lter (3) from the seating B.
• Press on the two tabs of the coarse lter inwards and remove from the micro lter C.
• Clean the lters thoroughly under running water. Use a brush if necessary.
• Replace metal / plastic lter..
• Replace the the coarse lter into the micro lter. Make sure that it is properly seated. NOTE: Incorrect placement of the lters will
reduce washing e ciency.
• Twist it clockwise until it clicks into place.
DO NOT operate your dishwasher without a
lter. You will damage your machine. Ensure
that your lters are correctly installed.
CAUTION
1 Lower spray arm
2 Upper spray arm
• Remove the lower rack from the machine.
• Pull o the lower spray arm in an upward direction A.
• Loosen the fastening screw of the upper spray arm and pull o the
spray arm B by a downward motion.
• Clean the spray arms under running water.
• Replace the lower spray arm in a downward direction.
• Replace the upper spray arm and tighten the fastening screw by
turning it around to the left.
• Insert the lower rack.
Cleaning the Spray Arms
Dirt and/or calcium residue may block the nozzles on the spray
arms. For this reason, regularly check the spray nozzles.
NOTICE
Check if the holes on the top of the third spray arm are clogged. If they are clogged, remove and
clean them.
To remove them, slightly push them upwards (1) and then turn clockwise (2).
To replace the impeller, seat it into its slot, push slightly upwards and turn it counter clockwise
until it is securely tted. When the impeller is released, check if it rotates without any
obstruction.
Made sure the fastening screw is tight on the upper spray arm.
CAUTION
Loading ...
Loading ...
Loading ...