Loading ...
Loading ...
Loading ...
5
ELECTRICAL CONNECTION
Before connecting the plug to the power outlet, make sure
that the voltage of your electrical system corresponds to the
voltage shown on the appliance rating label and the outlet
you are going to use is in good condition.
INSTALLATION
The appliance may be used on any rigid horizontal surface.
Do not overload the electrical circuit; avoid using the same
outlet for multiple appliances.
ASSEMBLING THE APPLIANCE
1. Connect the base of the appliance to the body, inser-
ting the pegs in the seats provided (see Figure 2).
2. Turn the appliance over and fasten the base to the
body using the screws provided (see Figure 3).
3. Run the power cord through the opening provided on
the base (see Figure 4).
TOOLS NEEDED AND ESTIMATED TIME
1 Phillips head screwdriver type PH 2 x 100
8 screws (included)
Assembly time: approx. 5 minutes
OPERATION AND USE
1. Connect the appliance to the power outlet.
2. The appliance emits a beep and the power indicator
light (H) comes on and remains on as long as the
appliance is powered.
3. The appliance goes into OFF and the display shows a
dot “l”. If the dot is blinking it means that the tip over
switch has been activated. See paragraph: “Additional
safety features” page 7.
4. Press the ON/OFF button (A) to turn on the appliance.
It will begin to heat with the predefined settings.
5. Press the MODE button (F) to select one of the fol-
lowing functions available:
Ventilation ( ) Anti-freeze ( )
Heating at minimum power (1) Heating at
maximum power/BOOST function (2)
5.1 Ventilation ( )
In this operating mode only the fan operates, so
the appliance does not heat the room.
5.2 Anti-freeze ( )
In this operating mode the appliance keeps the
room at a temperature of 45°F (7°C) to prevent
freezing temperatures.
5.3 Heating 1 and Heating 2
In this operating mode you can set the desired
temperature by pressing the + and - adjustment
buttons (B).
Heating 1 (minimum power level):
The appliance operates at the minimum power,
reducing noise and energy consumption to the
minimum.
Heating 2/BOOST function (maximum
power level):
The appliance operates at the maximum power
for rapid heating of the room.
6. Eco function
In this operating mode the appliance will automatical-
ly set the power level to guarantee the best comfort
reducing the energy consumption. In this operating
mode the unit may switch the heating power level
from maximum to minimum and viceversa, several
times in an hour. When using the ECO function, the
maximum temperature setting is 79°F (26°C). To acti-
vate this function, press the ECO button (D). The unit,
will always start at the maximum power.
SAVE THESE INSTRUCTIONS
For Household use only
21. Check that neither the appliance nor the
power cord have been damaged during ship-
ping.
22. Make sure that no styrofoam or other packing
materials remain in the appliance.
23. The first time the appliance is used, run it at
the maximum power for at least two hours.
During this time, ventilate the room thorou-
ghly to eliminate the “new” smell released by
the appliance. It is completely normal for the
appliance to emit “creaking” sounds the first
time it is run.
24. CAUTION: To prevent electric shock, make
sure the wide prong of the plug is inserted
in the wide slot of the outlet.
25. Do not place the heater near a bed because
objects such as pillows or blankets can fall
off the bed and be ignited by the heater.
26. Extreme caution is necessary whenever the
heater is left operating unattended.
27. Do not open the appliance. No user-servicea-
ble parts inside.
Loading ...
Loading ...
Loading ...