Loading ...
Loading ...
Loading ...
English - 6
USING YOUR DRIP COFFEEMAKER - 1 - 4 CUP MODE
Use the 1-4 Cup setting to make the perfect cup of coffee when you don’t want a
whole pot.
1. Prepare your coffeemaker as described in the “Preparing Coffee” section of this
manual, but do not turn the coffeemaker on when
ready. Make sure the carafe with cover is in place.
2. Press the “Program” button until “1-4 CUP” appears
in the display. Press the “Min/Select” ( ) button to
select this function or “Hr/Cancel” ( ) to deselect. Press “On/Off” to begin
brewing.
Note: 1 - 4 cup mode cannot be set with bold mode.
USING YOUR DRIP COFFEEMAKER - BOLD MODE
Use the Bold setting for a more robust cup of coffee. Bold mode will brew your coffee
more slowly at a hotter temperature to extract more flavor.
1. Prepare your coffeemaker as described in the “Preparing Coffee” section of this
manual, but do not turn the coffeemaker on when ready. Make sure the carafe
with cover is in place.
2. Press the “Program” button until “BOLD” appears in
the display. Press the “Min/Select” ( ) button to
select this function or “Hr/Cancel” ( ) to deselect.
Press “On/Off” to begin brewing.
Note: Bold mode cannot be set with 1-4 cup mode.
USING YOUR DRIP COFFEEMAKER - STEEP MODE
This coffeemaker features a Steep mode to extract the most flavorful cup of coffee.
Hot water will be held in the brew basket to thoroughly steep the grounds, extracting
the coffee flavor, before brewing into the carafe below.
1. Prepare your coffeemaker as described in the “Preparing Coffee” section of this
manual, but do not turn the coffeemaker on when ready. Make sure the carafe
with cover is in place.
2. To use the “STEEP” function without changing the
default steep time, press the “Steep” button on any
function before pressing “On/Off” to begin brewing.
The “Steep” light will be illuminated.
To customize the steep time, press the “Program” button until “STEEP” appears
in the display. Press the “Min/Select” ( ) button until the desired steep time has
been selected. The steep time will increase in 5 second increments up to one
minute. The default steep time is 45 seconds. After steep time is selected, the
“Steep” indicator will be illuminated. Wait 4 blinks of the setting, then it is set.
Press “On/Off” to begin brewing. The “Steep” light will be illuminated.
Loading ...
Loading ...
Loading ...