Loading ...
Loading ...
Loading ...
If the engine cannot be started due to a
discharged key fob battery, the engine
can be started using the following
procedure:
1.
Continue to depress the brake pedal
firmly until the engine has completely
started.
2. Manual Transmission: Continue to
depress the clutch pedal firmly until the
engine has completely started.
3. Verify that the keyless ignition start
indication light (green) flashes.
4.
Touch the keyless ignition
START/STOP button using the backside
of the key fob while the keyless ignition
start indicator light (green) flashes.
5. Verify that the keyless ignition start
indicator light (green) turns on.
6.
Push the keyless ignition
START/STOP button to start the engine.
When touching the keyless ignition
START/STOP button using the
backside of the key fob, touch the
keyless ignition START/STOP button
with the key fob buttons facing up.
The engine cannot be started unless
the clutch pedal is fully depressed
(manual transmission) or the brake
pedal is fully depressed (automatic
transmission).
If there is a malfunction with the keyless
ignition START/STOP button function,
the keyless ignition start indicator light
(amber) flashes. In this case, the engine
may start. However, contact an
authorized dealer as soon as possible.
If the keyless ignition start indicator light
(green) does not illuminate, perform the
operation from the beginning. If it does
not illuminate, contact an authorized
dealer.
To change the ignition position without
starting the engine, perform the
following operations after the keyless
ignition start indicator light (green) turns
on:
1. Release the clutch pedal (manual
transmission) or brake pedal (automatic
transmission).
2. Push the keyless ignition
START/STOP button to change the
ignition position. The ignition cycles in
the order of ACC, ON, and OFF each
time the keyless ignition START/STOP
button is pushed.
Note: To change the ignition position
again, perform the operation from the
beginning.
Emergency Operation For Starting
The Engine
If the key warning light (red) illuminates,
or the keyless ignition start indicator
light (amber) flashes, this could indicate
that the engine may not start using the
usual starting method. Contact an
authorized dealer as soon as possible.
If this occurs, the engine can be
force-started. push and hold the
keyless ignition START/STOP button
until the engine starts.
Other procedures necessary for starting
the engine such as having the key fob
in the vehicle, and depressing the
clutch pedal (manual transmission) or
the brake pedal (automatic
transmission) are required.
05010201-L12-0011
Discharged Key Fob Battery Start
Procedure
18
GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...