Loading ...
Loading ...
Loading ...
11
English
3 Connect the other end of the AC power
cord to the wall outlet.
» It takes about 35 seconds for the unit
to boot up. During boot-up, the
indicator on the front of the main unit
blinks in green quickly.
» After boot-up, the
indicator starts to
blink in green slowly.
Switch on or to standby mode
The unit switches on automatically after power
connection.
To switch the unit to standby mode, press
on the front of the main unit.
To switch the unit on from the standby
mode, press
again.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat,
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
#$%
1 Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3 Prepare
Always follow the instructions in this chapter in
sequence.
Connect
Connect power
Caution
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the
bottom of the unit.
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Before connecting the AC adaptor, ensure you have
completed all other connections.
1 Insert the plug from the AC adaptor to
the DC IN socket on the back of the main
unit.
2 Connect one end of the AC power cord
to the AC adaptor.
EN
Loading ...
Loading ...
Loading ...