Loading ...
Loading ...
Loading ...
Adjusting the legs
If your refrigerator is unbalanced;You can balance your
refrigerator by turning its front legs as illustrated in the
gure. The corner where the leg exists is lowered when
you turn in the direction of black arrow and raised when
you turn in the opposite direction.Taking help from someone
to slightly lift the refrigerator will facilitate this process.
A damaged power cable must be replaced by a qualied electrician.
Product must not be operated beforei t is repaired!
There is the risk of electric shock!
Disposing of the packaging
The packing materials may be dangerous for children.
Keep the packing materials out of the reach of children
or dispose of them by
classifying them in accordance
with the waste instructions stated by your local
authorities. Do not throw away with regular house
waste, throw away on packaging pick up spots
designated by the local authorities The packing of
your refrigerator is produced from recyclable materials.
Disposing of your old refrigerator
Dispose of your old refrigerator without giving any
harm to the environment.
•
You may consult your authorizeddealer or waste collection
center of your municipality about the disposalof your refrigerator.
Before disposing of your refrigerator, cut out the electric
plug and, if there are any locks on the door, make them
inoperable in order to protect childrenagainst any danger.
Placing and Installation
If the entrance door of the room where the refrigerator
will be installed isnot wide enough for the refrigerator to
pass through, then call the authorized service to have
them remove the doors of your refrigerator and pass it
sideways through the door.
1. Install your refrigerator to aplace that allows ease of use.
2. Keep your refrigerator awayfrom heat sources, humid
places and direct sunlight.
3. There must be appropriate air ventilation around your
refrigerator in order to achieve an efcient operation.
If the refrigerator is to be placed in a recess in the wall,
there must be at least 5 cm distance with the ceiling
and at least 5 cm with the wall. Do notplace your
product on the materials such as rug or carpet.
4. Place your refrigerator on aneven oor surface to
prevent jolts.
EN
5
Contact an Authorized Service for the installation
of the product. In order to prepare the product
for use, refer to the information in the user manual
and ensure that electrical installation andwater
installation are appropriate. If not,call a qualied
electrician and technicianto have any necessary
arrangements carried out.
Appropriate location for installation
•
Install the product where it will not be exposed to
temperatures below freezing or exposed to outdoor
weather conditions.
•
Do place the product near a grounded electrical outlet
•
Do not place the product on matterrials such as rugs
or carpets.
D70440NU
Height (cm/inch) unpacked 172 / 67.8 "
Width (cm/inch) unpacked 70 / 27.8 "
Depth (cm/inch) unpacked 67 / 26.4 "
Height (cm/inch) packed 181 / 71.3 "
Width (cm/inch) packed 76 / 29.9 "
Depth (cm/inch) packed 73 / 28.7 "
Gross Weight (Kg)/lbs 75 /165
Net Weight (Kg)/lbs 67 / 147
Door Open Warning (This feature is optional)
An audio warning signal will be given when the door of
your product is left open for at least 1 minute. This warning
will be muted when the dooris closed or any of the display
buttons (if any) are pressed.
‘ 175 ’
50 mm
100 mm
50 mm
50 mm
‘ 70 ’
‘ 67 ’
‘ 131 ’
‘ 72 ’
135 (’ 90 ‘ )
o
WARNING: Manufacturer shall not
WARNING: Product must not be
WARNING: If the door clearance
be held liable for damages that may arise
from procedures carried out by
unauthorized persons.
Pluged in during installation.
Otherwise, there is the risk of death
or serious injury !
of the room where the product will be
placed is so tight as to prevent passing
of the pro duct, remove the door of the
room and pass the product through the
door by
turning it to its side; if this does not
work,contact the authorized service.
WARNING:If the door of the room
Where the product will be placed is too
small for the product to pass, then
the product’s doors must be
removed and the product must be
turned aside to pass it through.
Loading ...
Loading ...
Loading ...