Loading ...
Loading ...
Loading ...
12
©
2017 DJI All Rights Reserved.
Spark
User Manual
Follow the steps below to use the Vision System:
1. Ensure the aircraft is in P Mode and place the aircraft on a at surface. Note that the Vision System
cannot work properly on surfaces without clear pattern variations.
2. Turn on the aircraft. The aircraft will hover in place after takeoff. The aircraft status indicators will ash
green twice, which indicates the Vision System is working.
Powered by the 3D Sensing System, the aircraft is able to actively brake when obstacles are detected in
front. The 3D Sensing System works best when lighting is adequate and the obstacle is clearly marked or
textured. The aircraft must y at no more than 6.7 mph (10.8 kph) to allow for sufcient braking distance.
3D Sensing and Vision System performance are affected by the type of surface being own over.
The aircraft will switch from P Mode to ATTI Mode automatically if neither GPS or Vision System
are available. Please be vigilant when operating Spark in the following situations:
Flying at high speeds below 0.5 meters.
Flying over monochrome surfaces (e.g., solid black, solid white, solid red, or solid green).
Flying over highly reective surfaces.
Flying over water or transparent surfaces.
Flying over moving surfaces or objects.
Flying in an area where the lighting changes frequently or drastically.
Flying over extremely dark (lux < 10) or bright (lux > 100,000, e.g., towards sunlight) surfaces.
Flying over surfaces without clear patterns or texture.
Flying over surfaces with identical repeating patterns or textures (e.g., tiling).
Flying over small and ne objects (e.g. tree branches and power lines).
Flying at speeds of over 6.7 mph (10.8 kph) at 2 meters above the ground.
Keep sensors clean at all times. Dirt or other debris may adversely affect their effectiveness.
Loading ...
Loading ...
Loading ...