Loading ...
Loading ...
Loading ...
en_us 7
8 Suction head
9 Suction head lock
10 Adapter ring
11 Filter cleaning handle
12 Lever for lowering the collection
container
13 Accessory holder
14 Chassis
15 Steering rollers with parking brake
Initial startup
1. Bring the device into the working po-
sition.
2. Ensure that vacuum head is fitted
correctly.
3. Insert the suction hose into the suc-
tion hose connection.
B
4. Plug the desired accessory onto the
suction hose.
Operation
The switch has 2 positions:
Position 0: The device is switched
off
Switch positions 1 and 2: Motor 1
and motor 2 are switched on
1. Plug the mains plug into the socket.
2. Switch on the device at the power
switch.
3. Start vacuuming.
Cleaning the dust filter
Clean the filter regularly to avoid a loss
of suction power.
C
1. Move the filter cleaning handle back
and forth several times to clean the
filter.
Emptying the collection
container
1. Switch off the device and disconnect
from the mains supply.
2. Clean the dust filter.
3. Lower the collection container by
pulling up the lever.
4. Empty the collection container into
the disposal facility.
5. Dispose of or recycle the contents in
accordance with statutory provisi-
ons.
Move the collection container on its rol-
lers only. Do not use a crane or e.g. a
forklift for this.
Removing the suction head
1. Switch off the device and disconnect
it from the mains supply.
2. Open the suction head lock.
3. Lift off the suction head and set it
down on a suitable surface.
F
Finishing operation
1. Switch off the device at the On/Off
switch
2. Empty and clean the collecting con-
tainer.
3. Remove the accessory and clean
and dry if necessary.
Transport
몇Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transport and storage.
1. When transporting in vehicles, secu-
re the device against slipping and
tipping over according to the appli-
cable guidelines.
Storage
몇Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transport and storage.
1. Store the device indoors only.
Care and service
1. Rinse the device and accessories at
regular intervals with a suitable li-
quid and allow them to dry.
Loading ...
Loading ...
Loading ...