Loading ...
Loading ...
Loading ...
43
FAULT CODES
If the problem persists, or the dishwasher shows any other fault code, disconnect the
dishwasher from the power supply, turn the water supply off and then contact Fisher &
Paykel Customer Care with the fault code information.
FAULT CODES AND
DESCRIPTIONS
POSSIBLE CAUSES WHAT TO DO
Drain fault
Drain hose is crimped or
bent.
Check the drain hose and
straighten if needed.
The waste water is not
draining out.
Ensure that the drain hose is
connected in accordance with
the installation instructions.
No water
Water tap not turned on. Ensure the water is connected
and turned on. Press to
restart the dishwasher.
Insufficient water supply
pressure.
Check household water
pressure.
Water inlet hose is crimped
or bent, so no or not enough
water gets to the dishwasher.
Check the water inlet hose and
straighten if needed. Press
to restart the dishwasher.
Drain hose is not connected
correctly.
Ensure that the drain hose is
connected in accordance with
the installation instructions.
Flooding
Flood switch activated. Turn the washing machine OFF
and ON again. If fault persists,
turn water off and disconnect
the dishwasher from the power
supply. Call Customer Care.
Water flow error. Switch dishwasher OFF
and ON again. If fault
persists call Customer Care.
Electronics error. Switch dishwasher OFF and ON
again. If the fault persists call
Customer Care.
Motor Fault. Switch dishwasher OFF at
the power supply. Wait a few
moments and switch ON again.
If the fault persists, turn water
off and disconnect from the
power supply. Call Customer
Care.
Loading ...
Loading ...
Loading ...