Loading ...
Loading ...
Loading ...
Insert the dipstick all the way back
into the transmission securely as
shown in the illustration.
The transmission should be drained
and refilled with new fluid according
to the time and distance recommen-
dations in the maintenance schedule.
Check the fluid level with the
transmission at normal operating
temperature and the vehicle sitting
on level ground. Remove the
transmission filler bolt and carefully
feel inside the bolt hole with your
finger. The fluid level should be up
to the edge of the bolt hole. If it is
not, add Honda Manual
Transmission Fluid (MTF) until it
starts to run out of the hole.
The transmission should be drained
and refilled with new fluid according
to the time and distance recommen-
dations in the maintenance schedule.
If Honda MTF is not available, you
may use an API service SG, SH or SJ
grade motor oil with a viscosity of
SAE 10W-30 or 10W-40 as a
temporary replacement. An SG
grade is preferred, but an SH or SJ
grade may be used if SG is not
available. However, motor oil does
not contain the proper additives and
continued use can cause stiffer
shifting. Replace as soon as it is
convenient.
Put a new washer on the filler bolt,
then reinstall the filler bolt and
tighten it securely.
6. 5-speed Manual Transmission
Transmission Fluid
Maintenance
261
FFIILLLLEERR BBOOLLTT
CCoorrrreecctt lleevveell
WWAASSHHEERR
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...