Loading ...
Loading ...
Loading ...
33
Using your Sunbeam Carveasy
™
Twin Blade
1. Select coarser or finer blade set depending
on type of foods to be sliced
2. Interlock blades together before inserting
into the appliance. To assemble blades,
grasp shaft ends below the safety guards
and slip the rivet on the tip of the other
blade. See Figure 1. Bring blades together
ensuring tips remain together.
Note: Always use both blades when operating
the Carveasy
™
.
3. Hold assembled blades by the safety
guards and slide shafts gently into the
blade slot until clipped into position.
See Figure 2.
Warning: Only when blades are fitted should
the cord be connected to the
power outlet.
4. Insert the plug into a 230-240 volt (AC
only) power outlet and ensure the cord is
well away from the blades. Holding the
knife with one hand, slide and press the
double movement power trigger positioned
under the handle to activate the motor.
Releasing the switch will automatically
stop the motor.
Warning: Avoid contact with moving parts.
Keep hands, hair, clothing and other utensils
away from moving blades during operation to
prevent personal injury and/or damage to the
knife.
5. When slicing is completed, turn the power
off at the power outlet and remove the
plug. Slide back the Blade Release, hold
the blades by the safety guards with the
cutting edge facing downward and pull the
blades out of the slots. See Figure 3.
Warning: The blades of your Sunbeam
Carveasy
™
are sharp! Handle with extreme
care. We recommend using the guard sleeve
provided when handling the blades. Do
not fit or remove blades whilst the knife is
connected to the power outlet. Do not allow
children to operate the appliance.
Figure 1
Figure 3
Figure 2
Loading ...
Loading ...
Loading ...