Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/Miele-F-2811-Vi-MasterCool-freezer/bg23.png)
Building in the appliance
35
Pushing the appliance into the
niche
Push the appliance into the niche,
taking care not to damage the power
cord and plumbed water connec-
tions.
If you are installing several appliances
side by side, now secure the appli-
ances to one another (see the instruc-
tions for the side-by-side installation
kit).
Remove the baseboard from the
appliance base as follows:
Carefully guide a flat-head screw-
driver through the grate in the base-
board on both sides and use it to
push the internal plastic latches out-
wards to release the baseboard.
5
6
Affix edge protection to the adja-
cent cabinet fronts.
Insert the plug connector at the back
of the appliance (see “Electrical con-
nection”).
Insert the plug into the electrical
socket.
The electrical socket should be close
to the appliance and easily accessi-
ble!
Otherwise, it must be possible to
switch the appliance on and off us-
ing an external all-pole switch with a
sufficient contact gap!
Risk of short circuit and over-
loading!
When installing appliances side by
side, each appliance must have its
own separate electrical socket.
Tip: To secure the power cord to pre-
vent it becoming caught:
Tie a piece of string to the middle of the
cord and as the appliance is being
pushed into the niche, pull the cord for-
ward underneath the appliance.
Carefully push the appliance into the
niche.
Loading ...
Loading ...
Loading ...