Loading ...
Loading ...
Loading ...
Care and storage
60
Steering cable ball joint (jet thrust nozzle
end) and steering cable inner wire (jet
thrust nozzle end)
EJU40934
Rustproofing
NOTICE
ECJ01361
Do not run the engine for more than 15
seconds on land without supplying water,
otherwise the engine could overheat.
Spray metallic parts of the hull and engine
with a rust inhibitor such as Yamaha Silicone
Protectant and Lubricant.
To rustproof the internal engine components:
(1) Remove the hood. (See page 28 for hood
removal and installation procedures.)
(2) Loosen the silencer cap and remove it.
(3) Make sure that the area around the wa-
tercraft is clear, and then start the engine
in a well-ventilated area.
(4) Run the engine at a fast idle.
(5) Quickly spray as much rust inhibitor as
possible through the hole in the silencer
cover. Use Yamaha Stor-Rite Engine
Fogging Oil or an equivalent. Keep
spraying until the engine stalls (or a maxi-
mum of 15 seconds). WARNING! Do not
pour or spray gasoline, or any sub-
stance other than a rust inhibitor
through the hole in the silencer cover.
Do not spray flammable rust inhibitor
products on engine surfaces while the
engine is hot. Otherwise, a fire or ex-
plosion could occur.
[EWJ00302]
(6) Securely install the silencer cap by tight-
ening it until it stops. NOTI CE : Be sure
to install the silencer cap securely af-
ter fogging the engine, otherwise wa-
ter could enter the engine and cause
damage.
[ECJ00153]
(7) Securely install the hood in its original
position.
1 Silencer cap
UF4D12E0.book Page 60 Monday, March 7, 2016 9:48 AM
Loading ...
Loading ...
Loading ...