Loading ...
Loading ...
Loading ...
EN
3
33
USE
Control panel
But
ton
Function LED button
A The button only works when the door is open.
Turns the motor On/Off at speed one.
Press and hold the button for approximately 5 seconds, with
all the loads turned off (Motor and Lights), to turn the
Remote control On/Off.
IR+Dot (Flashes twice)-Remote control On.
IR+Dot (Flashes once)–Remote control Off.
B Press Briefly = Turns the Lights On/Off at maximum intensity.
Press and hold for 2 Seconds = Turns the Courtesy Lights On/Off.
C
The button only works when the door is open.
Activates / Deactivates the 24h function which turns the
motor on at speed one for 10 minutes every hour, for 24
hours.
At the end of this time the hood turns Off.
Displays an animation.
D Only works with the Door Open = decreases the operating speed.
Speeds P1 - P2 are the 2 intensive speeds, which are set to:
P1 = 5 minutes and P2 = 7 minutes
At the end of this time the motor returns to speed two.
Displays the set speed:
P2 – P1 – 3 – 2 – 1
E Only works with the Door Open = increases the operating speed.
Speeds P1 - P2 are the 2 intensive speeds, which are set to:
P1 = 5 minutes and P2 = 7 minutes
At the end of this time the motor returns to speed two.
Displays the set speed:
1 – 2 – 3 – P1 – P2
Works both with the Door Closed and Open.
Press and hold for 2 Seconds = Enables/Disables the Activated
Charcoal Filter Alarm with the Motor turned off and no Filter
Alarm triggered.
C flashes twice = A.C. Filter Alarm Activated
C flashes once = A.C. Filter Alarm Deactivated
F Only works with the Door Open.
Activates/Deactivates the Delay, automatic switch-off of the motor
with a 15’ delay.
When this function is activated the motor is set to speed one. If the
function is deactivated before the time foreseen, the motor will
remain at speed one.
Displays L
G Works both with the Door Closed and Open.
Press and hold for 2 Seconds = With the filter alarm triggered the
Filter Alarm is Reset. These indications are only visible when the
motor is turned off.
Displays
Indicates the need to wash the metal grease filters.
The alarm is triggered after the Hood has been in
operation for 100 working hours.
Displays
:
Indicates the need to change the activated charcoal
filters, and also to wash the metal grease filters.
The alarm is triggered after the Hood has been in
operation for 200 working hours.
H Door Closed
Opens the door and Motor + Lights = On.
Door Open
Closes the door and Motor + Lights = Off
Loading ...
Loading ...
Loading ...