Philips MCM704D/37 Micro Hi-Fi System

User Manual - Page 21

For MCM704D/37.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
Loading ...
English
21
Radio Reception
Tuning to radio stations
1 Press SOURCE on the top of the system or
TUNER on the remote to select TUNER.
2 Press SOURCE or TUNER to select the
desired waveband: FM or AM.
3 Press and hold the control knob on the front
panel of the system to the left or right
(corresponding to S/T) or S/T on
the remote.
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
4 Repeat step 2 if necessary until you find the
desired station.
To tune to a weak station, press the control
knob on the front panel of the system to the left
or right (corresponding to S/T) or S/
T on the remote briefly and repeatedly until
you have found optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start from preset 1
and stop at the last programmed station. All the
former programmed radio stations will be
overridden.
1 Press PRESET -/+ on the top of the system or
ALBUM/PRESET +/- on the remote to
select the preset number where programming
should start.
Note:
If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2 Press and hold the control knob on the front
panel upward (corresponding to PROGRAM)
or PROG on the remote for more than 2
seconds to activate programming.
AUTO is displayed and available stations are
programmed in order of waveband reception
strength: AM followed by FM. The last preset
automatically stored will then be played.
Manual programming
1 Tune to your desired station (see “Tuning to
radio stations”).
2 Press the control knob on the front panel
upward (corresponding to PROGRAM) or
PROG on the remote to activate programming.
3 Press PRESET -/+ on the top of the system or
ALBUM/PRESET +/- on the remote to
allocate a number from 1 to 40 to this station.
4 Press the control knob on the front panel
upward (corresponding to PROGRAM) or
PROG on the remote again to confirm the
setting.
The preset number and the frequency of the
preset station are shown.
pg001-031_MCM704D_37-Eng 2007.4.7, 14:5121
Loading ...
Loading ...
Loading ...