Loading ...
Loading ...
Loading ...
E166722
Note: The jack does not require
maintenance or additional lubrication over
the service life of your vehicle.
Note: Passengers should not remain in your
vehicle when the vehicle is being jacked.
1. Park on a level surface, set the parking
brake and activate the hazard flashers.
2. Place the transmission in park (P) and
turn the engine off.
E175447
3. Block both the front and rear of the
wheel diagonally opposite the flat tire.
For example, if the left front tire is flat,
block the right rear wheel.
4. Lift and remove the carpeted load floor
panel to access the minispare and jack
kit.
5. Remove the wing nut securing the
spare tire by turning it
counterclockwise.
6. Remove the spare tire and jack kit from
the spare tire compartment.
E178186
7. Remove plastic wing nut and jack and
lug wrench assembly.
8. Detach the lug wrench from the jack
by turning the jack hex nut drive screw
counterclockwise. This will lower the
jack and loosen the mechanical lock.
E181744
9. Unfold the wrench for use.
E175694
10. If your vehicle has wheel trim covering
the lug nuts, use the tool provided
with the jack assembly to remove the
wheel trim.
336
Edge (CDQ) Canada/United States of America, enUSA, Edition date: 201907, Third-Printing-
Wheels and Tires
Loading ...
Loading ...
Loading ...