Loading ...
Loading ...
Loading ...
installing Winter wheel and tire assemblies on your
vehicle. To deactivate the TPMS, first, replace all four
wheel and tire assemblies (road tires) with tires not
equipped with Tire Pressure Monitoring (TPM) Sensors.
Then, drive the vehicle for 10 minutes above 15 mph
(24 km/h). The TPMS will chime, the “TPM Telltale
Light” will flash on and off for 75 seconds and then
remain on and the instrument cluster will display the
“SERVICE TPM SYSTEM” message and then display
dashes (--) in place of the pressure values. Beginning with
the next ignition switch cycle, the TPMS will no longer
chime or flash the TPM telltale and display the “SERVICE
TPM SYSTEM” message in the instrument cluster display
but dashes (--) will remain in place of the pressure values.
To reactivate the TPMS, replace all four wheel and tire
assemblies (road tires) with tires equipped with TPM
sensors. Then, drive the vehicle for up to 10 minutes
above 15 mph (24 km/h). The TPMS will chime, the
“TPM Telltale Light” will flash on and off for 75 seconds
and then turn off, and the instrument cluster will display
the “SERVICE TPM SYSTEM” message. The instrument
cluster will also display pressure values in place of the
dashes. On the next ignition switch cycle the “SERVICE
TPM SYSTEM” message will no longer be displayed as
long as no system fault exists.
General Information
This device complies with Part 15 of the FCC rules and
RSS-210 of Industry Canada. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired op-
eration.
NOTE: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate the equipment.
546 STARTING AND OPERATING
Loading ...
Loading ...
Loading ...