Loading ...
Loading ...
Loading ...
8
ENGLISH_index
Before Installation
(Except for LSW440B)
• Do not use the product for any purpose other than installing the
TV on a wall.
• Avoid product damage and safety accidents caused by careless
installing or use of improper or unauthorized wall mount.
• Follow the instructions in the installation manual for a convenient
installation of the wall mount.
• Immediately discontinue installation and contact the service centre
if you cannot fully understand the installation process.
Use a professional installer if any installation issues remain after
the inquiry.
• Installation of this product on a concrete wall or wood stud is
recommended. Installation of this product on other surfaces
(Dry wall, plywood, bricks, etc.) is not recommended. Improper
installation may result in the product falling.
• Install the product only on a vertical wall.
Do not install on a tilted wall that exceeds building standards or on
the heavily titled wall or ceiling.
LG is not responsible for problems caused by improper installation
of the product, e.g., heavily tilted walls and ceilings.
• Check the enclosed accessories before installation. We are not
responsible for any lost or damaged accessories after the inner
packaging is opened.
• When an infant or small child swallows the enclosed accessories,
various safety accidents such as choking may occur. Keep the
enclosed accessories out of the reach of infants and children.
• When tightening screws, tighten until fully snug.
Avoid using excessive force when tightening the screws. Doing
so may damage the wall and product or reduce the rigidity or
performance of the product.
• Avoid installing a TV that exceeds the specied tensile load, and do
not allow any external force to be applied to the product.
• Avoid accidents by using work tools with care during installation.
Tools for Installation
• "+" shaped screwdriver (manual or electric) / level / drill / Ø8mm
drill bit for concrete or Ø4mm drill bit for steel
Securing TV to the Wall
(Except for LSW440B)
• Please use the TV close to the wall after installation.
How to x anchors and screws
(Except for LSW440B)
Please make sure that:
• Check that the material and thickness of the wall and nishing
material comply with the installation manual. Before beginning
the mounting process, you must be sure the wall is able to support
the weight of the TV.
• Should use the enclosed anchors and screws on crack-free concrete
walls.
• Never install the product on a plasterboard or wall made of paper
or medium-density berboard (MDF). When it is necessary to
install the product on such wall, anchor screws must be fastened
to retaining walls (concrete) or wood Stud inside the nishing
material.
• The wall mount should be attached to a stud.This usually will not
be a problem, but depending on individual circumstances, there
may be cases when the ability to mount into a studis not possible.
In this case, there are a variety of drywall anchors, such as toggle
bolts, which may provide a solution.If using drywall anchors,
please be sure the anchors and the wall have the ability to support
the weight of your TV. Please note that the supplied anchors may
not be the correct ones for your individual situation, so you should
check with a local professional.
• Other unspecied walls must be capable of supporting pullout
loads of over 70kgf (686N) and shear loads of over 100kgf (980N)
per fastener.
• Use an Ø 8mm drill bit for concrete and a hammer (impact) drill or
Ø 4mm drill bit for wood stud to drill holes.
Loading ...
Loading ...
Loading ...