Loading ...
Loading ...
Loading ...
10
ENG
ENGLISH
ASSEMBLING AND PREPARING
y
Illustrations in this document represent typical
procedures, so they may look different from the
actual product.
y
Do not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
y
When lifting or moving the monitor, do not
touch the monitor screen. The force applied to
the monitor screen may cause damage to it.
y
Do not apply foreign substances (oils, lubricants,
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
y
Applying excessive force when tightening screws
may cause damage to the monitor. Damage
caused in this way will not be covered by the
product warranty.
CAUTION
y
You can disassemble the stand in the reverse
order of the assembly.
NOTE
Installing onto a table
1
Lift the monitor and place it on the table in an up-
right position.
Place at least 100 mm (3.94 inches) away from the
wall to ensure sufficient ventilation.
2
Connect the Power cord to the monitor, then plug
the power cord into the wall outlet.
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
y
Unplug the power cord prior to moving or install-
ing the monitor. There is risk of electric shock.
CAUTION
3
Press the joystick button on the bottom of the
monitor to turn on the monitor.
or
Loading ...
Loading ...
Loading ...