Loading ...
Loading ...
Loading ...
16 Room Air Conditioner
Operating Instructions
Remote control
The remote control and control panel will look like one of the following pictures.
16 Room Air Conditioner
- when the air conditioner is off, it can be set to automatically turn
Delay OFF
- when the air conditioner is on, it can be set to automatically turn
on from 1 to 24 hours at its previous mode and fan settings.
off from 1 to 24 hours.
Delay ON
FAN SPEED SELECTOR
Use to set the fan speed to
Low (F1), High (
F2).
Operating Instructions
Operation starts when this button is pressed and stops when you
press the button again.
POWER
ON/OFF TIMER
Power
Temp
Fan Speed
Timer Mode
1
4
2
3
5
REMOTE CONTROLLER
2 3
1
7
5
4
6
OPERATION MODE SELECTOR
the desired fan speed.
Cool
- Compressor runs and cools the room.Use the
and FAN buttons to
set the desired temperature and circulation fan speed.
Fan - Fan circulates air but compressor does not run. Use the FAN button to set
Heat - Heater runs and heats the room.
Push the MODE button to rotate between Energy Saver / Cool / Fan / Heat.
Approximately every 3 minutes the fan will turn on and check the room air
Energy Saver
- The fan stops when the compressor stops cooling.
temperature if cooling is needed.
Loading ...
Loading ...
Loading ...