Loading ...
Loading ...
Loading ...
English Controls / Power supply
Controls (See 1)
1
AL1/ AL2 indicator – lights up when
ALARM 1 or ALARM2 is activated
2
PM indicator
3
ALARM 1
(
OFF•SET•ON)
–
switches on ALARM 1
–
sets alarm time of ALARM 1
–
switches off ALARM1
4
REPEAT ALARM – switches off the alarm
for a 6-minute period
5 Display
– shows the status of the set
6
ALARM 2
(
OFF•SET•ON)
–
switches on ALARM 2
–
sets alarm time of ALARM 2
–
switches off ALARM2
7
LIFT TO OPEN - lift here to open CD
door
8
TUNING - tunes to a radio station
9
STOP 9 - stops CD playback
0
PLAY/PAUSE 2; - starts or pauses CD
playback.
!
MIN ∞ / HOUR §
–
adjusts the minute/hour for clock/alarm time
–
skips or searches CD track/ passage
backward/ forward
@
FM•AM•BUZ•CD
–
selects FM, AM or CD sound source
–
selects radio, buzzer or CD alarm mode
#
POWER/ ALARM RESET
–
switches the set on/off
–
stops the active buzzer, radio or CD alarm
for 24 hours
–
switches off the sleep timer
$
SLEEP
–
activates the radio/CD player for SLEEP
function
–
displays/adjusts/switches off sleep timer
%
SET TIME – sets the clock time
^
VOLUME - adjusts volume level
&
Battery compartment
–
insert a 9 volt
battery, type 6F22 (not supplied) for clock
memory backup
*
Power cord - connects to wall outlet.
(
RESET
–
use a ballpoint pen to press RESET
if the set/display does not react to any of the
controls
Power Supply
1 Check if the power voltage, as shown on the
bottom of the set, corresponds to your local
power supply.
2 Connect the power plug to the wall outlet..
The power supply is switched on and 12:00
flashes on the display.You can set the clock
now. (See Setting the clock)
3 To switch off the set completely, withdraw the
power cord from the wall socket.
Clock memory backup
When a power failure occurs, the set will be
switched off completely. When the
power supply returns, 12:00 flashes on the
display and you need to reset the clock.
To retain the clock/ alarm time in the event
of AC power failure or disconnection, insert
a 9 volt battery, type 6F22 (not supplied) into
the battery compartment: it will act as clock
memory backup. However, the time will not
be illuminated on the display. Operation of
the alarms, FM/AM radio and CD are also
excluded. As soon as the power supply
returns, the display will indicate the correct
time.
Clock / Radio CD player
1 Connect the power plug to the wall outlet.
2 Insert the battery into the battery
compartment..
• Replace the battery once a year, or as often
as necessary.
Batteries contain chemical substances, so
they should be disposed of properly.
Setting the clock
Clock display
The display shows the time and also indicates
whether you have switched on the alarm(s).
The indicators light up next to AL1 and AL2
respectively.
The time is displayed using 12-hour clock
(PM indicator lights up = PM, off = AM)
1 Press
SET TIME once or more until the
hour/minute digits flash.
➜ Display: 12:00 flashes by default.
2 Hold down or press
HOUR § / MIN ∞
repeatedly to adjust the hours and minutes
respectively. Release
HOUR § / MIN ∞
when you have reached the correct setting.
3 Press
SET TIME
to confirm.
Important Note:
Press and hold SET TIME button will
change the display from 12 hours to 24
hours.
Standby power consumption
(clock mode) 1.0W
Radio
1 Press
POWER
to switch on.
➜ POWER button lights up.
2 Use
FM•AM•BUZ•CD
to select FM or AM
waveband.
3 Use
TUNING
(on the side panel) to find
your station.
4 Adjust the sound with the
VOLUME
control.
To improve reception:
FM: Extend and adjust power cord for
optimum reception.
AM: Use the built-in antenna. Direct the
antenna by adjusting the position of your
unit.
5 Press
POWER
to switch off.
➜ POWER button light turns off.
CD playback
This set can play audio discs including
CD-recordables.
Do not try to play a CD-ROM, CD-RW, CDI,
VCD, DVD or computer CD.
1 Open the CD door.
2 Insert a CD with the printed side facing up,
and close the CD door.
3 Press
POWER
to switch on.
➜ POWER button lights up.
4 Select CD source by using the
FM•AM•BUZ•CD
selector.
5 Press
PLAY/PAUSE 2;
to start playback.
➜ Display shows briefly current track number
and returns to the clock display.
6 Adjust the sound with the
VOLUME
con-
trol.
7 To interrupt playback, press
2;
.
8 Press
2;
to resume playback.
Loading ...
Loading ...
Loading ...