Loading ...
Loading ...
Loading ...
www.BISSELL.com
5
Operati๎s
Power cord storage
1. Turn Vacuum OFF (O).
2. Unplug power cord by grasping the polarized
plug, NOT the cord, and disconnect from outlet.
3. Loop power cord around cord wraps on the handle.
4. Clip molded plug to power cord to secure.
Emptying the dirt container
1. Turn Vacuum OFF (O).
2. Hold the vacuum vertically and press the
dirt container release latch. Gently pull the dirt
container from the hand vacuum.
3. Grip and remove the filter. Empty contents
into a waste container.
4. The dirt container may be rinsed with warm
water and a mild detergent if needed. The dirt
container must be thoroughly dried before
replacing.
5. Replace filter. Attach dirt container to
vacuum by depressing latch and securely
fitting onto hand grip. Make sure dirt container
is correctly secured.
Cleaning the filter
The key to maximum performance is having
clean filters. Cleaning the filters after each use
will help your Featherweight vacuum operate at
peak efficiency.
Use only BISSELL replacement filters in your
BISSELL Featherweight vacuum.
1. Turn Vacuum OFF (O).
2. Follow the steps above to remove dirt
container and filter. To clean the main filter, shake
over a waste container until debris is gone. Place
the filter back into the dirt container.
NOTE: After heavy usage, you may clean the
filter by washing it gently by hand in warm
water and mild dish detergent. Rinse
thoroughly and make certain it is completely
dry before replacing it. If filter is torn, replace
it with a new filter.
3. Attach dirt container to vacuum by depressing
latch and securely fitting onto hand vacuum grip.
Make sure dirt container is correctly secured.
5.
2.
3.
2.
WARNING
To reduce the risk of electric shock, turn power switch o๎
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
Main๎n๎ce & Care
Loading ...
Loading ...
Loading ...