Loading ...
Loading ...
Loading ...
Mobility
223
Reference At a glanceControlsDriving tipsCommunications NavigationEntertainment
Tow-starting
Do not tow-start the vehicle if possible, but
instead start the engine by means of jump start-
ing, refer to page 220. With a catalytic con-
verter, the vehicle should only be tow-started
with the engine cold.
Manual transmission
1. Switch on the hazard warning flashers,
comply with country-specific regulations.
2. Switch on the ignition, refer to page 58.
3. Shift into 3rd gear.
4. Tow-start with the clutch completely
depressed and slowly release the clutch.
After the engine starts, immediately
depress the clutch again completely.
5. Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
6. Have the vehicle checked.
Sequential Manual Transmission with
Drivelogic
1. Switch on the hazard warning flashers,
comply with country-specific regulations.
2. Switch on the ignition, refer to page 58.
3. Tow-start in selector lever position N.
4. Move the selector lever into the drive posi-
tion and pull toward + within 2 seconds.
The correct gear will be selected and
engaged automatically.
5. Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
6. Have the vehicle checked.
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG
Loading ...
Loading ...
Loading ...