Loading ...
Loading ...
Loading ...
3
Install the exterior assembly
Diameter is 21/8" (54 mm) Diameter is 11/2" (38 mm)
21/8"
54 mm
11/2"
38 mm
“E” is required for installation.
Install “E” on “D”.
“E” is not needed for
installation. Discard “E”.
Locate mounting plate (G).
Note: It is on the back of
the interior assembly.
or
What is the diameter of the hole in the door? Install exterior assembly and mounting plate.
A C
B
a
b
c
d
e
Cable goes underneath latch.
Rotate torque blade to align
with D-shaped hole.
Route cable
through
center hole,
then push
cable into
bottom hole.
Keep parallel to
edge of door
Insert key and test latch. If
latch does not extend or retract
smoothly, adjust screws (T).
Remove key when inished
and make sure the latch
bolt is fully extended.
Tighten
screws evenly
D
G
G
F
T
D
E
E
T (2x)
4 / 11 © 2016 Spectrum Brands, Inc.
Locate mounting screws and keep them within reach.
T
Loading ...
Loading ...
Loading ...