Loading ...
Loading ...
Loading ...
8 INSTALLATION
INSTALLATION
1. Using a spirit level mark a vertical centre line on
the wall where the hood is to be positioned, and
a horizontal line at the hood base position.
(See Fig. 4, or 5 for relevant model.
NOTE: The height of the underside of the hood body
must be a minimum of 600mm* to a maximum height
of 800mm.
* If the instructions of the hob specify a greater
distance than the minimum above, then that shall
be the minimum height for installation.
2. Mark the location for the flue cover wall mounting
brackets and rangehood mounting points and
anti-tilt fixing points above the hood base using
the hood base as a reference point
WRC613SB WRC913SB
A 600mm 900mm
B 440mm 550mm
Loading ...
Loading ...
Loading ...