Loading ...
Loading ...
Loading ...
84
uuIndicatorsu
Instrument Panel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
*
System Message
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w
*1
, then goes off.
●
Comes on along with a beep when
a problem is detected. A system
message on the driver information
interface appears at the same time.
●
While the indicator is on, press the
(information) button to see the
message again.
●
Refer to the Indicators information in this
chapter when a system message appears
on the multi-information display. Take
the appropriate action for the message.
●
The multi-information display does not
return to the normal screen unless the
warning is canceled, or the
button is pressed.
—
Turn Signal and
Hazard Warning
Indicators
●
The turn signal indicators blink
when you operate the turn signal
lever.
●
If you press the hazard warning
button, both indicators and all turn
signals blink at the same time.
●
Does not blink or blinks rapidly - A
turn signal light bulb has blown. Change
the bulb immediately.
2 Replacing Light Bulbs P. 512, 515
—
High Beam
Indicator
●
Comes on when the high beam
headlights are on.
— —
Lights On
Indicator
●
Comes on whenever the light
switch is on, or in AUTO
*
when
the exterior lights are on.
●
If you remove the key from the ignition
switch*, or set the power mode* to
VEHICLE OFF (LOCK) while the exterior
lights are on, a chime sounds when the
driver’s door is opened.
—
* Not available on all models
19 FIT JAZZ-31T5A6400.book 84 ページ ２０１８年２月２６日 月曜日 午後４時３０分
Loading ...
Loading ...
Loading ...