Loading ...
Loading ...
Loading ...
293
4-5. Using the driving support systems
4
Driving
TACOMA_OM_USA_OM04025U_20MY
n The Blind Spot Monitor function is operational when
l The BSM main switch is set to on.
l Vehicle speed is greater than approximately 10 mph (16 km/h)
n The Blind Spot Monitor function will detect a vehicle when
l A vehicle in an adjacent lane overtakes the vehicle.
l Another vehicle enters the detection area when it changes lanes.
n Conditions under which the Blind Spot Monitor function will not detect a
vehicle
The Blind Spot Monitor function is not designed to detect the following types
of vehicles and/or objects:
l Small motorcycles, bicycles, pedestrians, etc.
*
l Vehicles traveling in the opposite direction
l Guardrails, walls, signs, parked vehicles and similar stationary objects
*
l Following vehicles that are in the same lane*
l Vehicles driving 2 lanes across from your vehicle*
*
: Depending on conditions, detection of a vehicle and/or object may occur
n Conditions under which the Blind Spot Monitor function may not func-
tion correctly
l The Blind Spot Monitor function may not detect vehicles correctly in the fol-
lowing conditions:
• During bad weather such as heavy rain, fog, snow, etc.
• When ice or mud, etc., is attached to the rear bumper
• When driving on a road surface that is wet due to rain, standing water,
etc.
• When there is a significant difference in speed between your vehicle and
the vehicle that enters the detection area
• When a vehicle is in the detection area from a stop and remains in the
detection area as your vehicle accelerates
• When driving up or down consecutive steep inclines, such as hills, a dip
in the road, etc.
• When multiple vehicles approach with only a small gap between each
vehicle
• When vehicle lanes are wide, and the vehicle in the next lane is too far
away from your vehicle
• When the vehicle that enters the detection area is traveling at about the
same speed as your vehicle
• When towing anything such as trailer, boat, etc.
• When there is a significant difference in height between your vehicle and
the vehicle that enters the detection area
• Directly after the BSM main switch is set to on
• When items such as a bicycle carrier are installed on the rear of the vehi-
cle
Loading ...
Loading ...
Loading ...