Loading ...
Loading ...
Loading ...
Equipment operation
29
To install the hood:
(1) Position the hood on the deck so that the
two projections at the front of the hood fit
under the two stays on the deck.
(2) Push down on the hood latch, and then
turn the knob to the “LOCK” position to
securely lock the hood in place.
(3) While holding the steering pole, move
the lock pin to the stowed position, and
then lower the steering pole.
EJU36003
Bow rope hole
The bow rope hole is used to attach a rope to
the watercraft when transporting, mooring, or
towing it in an emergency. (See page 73 for
information on towing the watercraft.)
EJU36012
Stern rope hole
The stern rope hole is used to attach a rope
to the watercraft when mooring it.
EJU31676
Storage pouch
The storage pouch is located on the bottom
of the hood.
Use the storage pouch to store the own-
er’s/operator’s manual, tool kit, and other
small items. The storage pouch is not de-
signed to be waterproof. If you carry objects
that must be kept dry, put them in a water-
proof bag.
To remove the storage pouch:
(1) Remove the hood. (See page 28 for hood
removal and installation procedures.)
LOCK
OPEN
1 Bow rope hole
1 Stern rope hole
1
UF2F16E0.book Page 29 Tuesday, April 23, 2013 10:03 AM
Loading ...
Loading ...
Loading ...