Loading ...
Loading ...
Loading ...
16 ENGLISH ENGLISH 1717
C 15 Replace the Razor Head Assembly back on
razor.
16 Put the protective razor head cap on the
razor to protect heads.
After Each Use: Trimmer
1 Turn razor to OFF (O) position.
C 2 Push trimmer slide switch up to pop up
trimmer.
C 3 Clean trimmer with the brush every time
you use it.
C 4 Lubricate the trimmer teeth with one drop
of mineral oil every 6 months.
5 Close trimmer by sliding trimmer switch
down.
This razor has no other user-serviceable parts.
For assistance call 1-800-243-3050.
C 7 Remove and clean one cutter and comb at
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
8 Separate the cutter from the comb.
C 9 Only brush the cutter in an upward motion.
Use the short bristled side of the brush.
C 10 Brush the slots of the comb.
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Philips Norelco Shaving Head Cleaning Spray,
model HQ110 or alcohol). This helps prevent wear
of the shaving heads.
C 11 Replace the cutter and comb into the
Razor Head Assembly.
12 Repeat the process for the other two sets
of cutters and combs.
13 Replace the frame.
C 14 Turn the wheel clockwise until it locks into
place.
1
2
Loading ...
Loading ...
Loading ...