Loading ...
Loading ...
Loading ...
55
English
Plug the power cord into the nearest outlet. Make sure the surface is dry (never place
Airfree
®
on wet floor or immerge it in water). Make sure the On/Off led is on. After 30
minutes the top lid should be warm.*
Place Airfree
®
on a flat surface preferably not exceedingm 3’ from the floor, not under
furniture, shelves, or behind curtains as it will interfere with air flow and Airfree
®
efficiency in destroying microorganisms.
Check if the area is compatible with the unit capacity to achieve best unit performance.
Using Airfree
®
in rooms larger than its capacity will greatly reduce its purifying
capacity.
Airfree
®
must be continuously on in the same room, 24 hours a day. Nevertheless,
temporarily removing it from the room will allow new microorganism contamination to
grow but it will be destroyed when Airfree
®
is plugged in again. The longer the period
without Airfree
®
the higher the new contamination in the room.
Rooms with air condition or ventilation will not affect the air sterilization efficiency of
your Airfree
®
. Same for Heating systems.
Airfree
®
can be placed in corridors but the air sterilization effects will barely have any
effect in connecting rooms.
Airfree
®
is to be used preferably in rooms larger than 43 sq. ft. or 353 cu. ft.
Avoid place the unit near open doors or windows to prevent some of the sterilized air
to exit the room.
(*) The “Technical Characteristics“ describes which models incorporate the led light and
which models needs to be wall mounted.
What Airfree
®
Destroys
Mold and
Mildew
Pet Dander
Allergens
Pollens
Bacteria
Dust Mites
Allergens
Organic
Odors
Ozone (O3)
Viruses
It is important to stress that Airfree
®
will not destroy or remove mold from an infected
item or surface. Those surfaces must be cleaned manually since they are a continuous
source of new spores. Airfree
®
will destroy airbone molds, spores and prevents them from
contaminating other areas, inhibiting the growth of existing and new colonies.
Airfree
®
and Mold
Loading ...
Loading ...
Loading ...