Loading ...
Loading ...
3
GB
For safety reasons, be sure to attach the centre covers to the
rear of the TV when TV in Table-Top condition.
Only qualified service personnel should carry out wall-mount
installations.
For safety reasons, it is strongly recommended that you use
S
ony accessories, including:
Wall-Mount Bracket SU-WL850
Wall-Mount Bracket SU-WL450
Be sure to use the screws supplied with the Wall-Mount Bracket
when attaching the Wall-Mount Bracket to the TV set. The
supplied screws are designed as indicated by illustration when
measured from the attaching surface of the Wall-Mount Bracket.
The diameter and length of the screws differ depending on the
W
all-Mount Bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
Transporting
Before transporting the TV set, disconnect all cables.
Two or three people are needed to transport a large TV set.
When transporting the TV set by hand, hold it as shown below.
Do not put stress on the panel and the frame around the screen.
When handling or mounting the
T
V set, do not lay down the TV.
When transporting the TV set, do
n
ot subject it to jolts or excessive vibration.
When transporting the TV set for repairs or when moving, pack
it
using the original carton and packing material.
Topple prevention
(Except models with supplied support belt kit)
Ventilation
Never cover the ventilation holes or insert anything into the
cabinet.
Leave space around the TV set as shown below.
It is strongly recommended that you use a Sony Wall-Mount
Bracket in order to provide adequate air circulation.
Installed on the wall
Installed with stand
Screw (M6)
Wall-Mount Bracket
9 mm - 13 mm
TV’s rear cover
M4 screw (not supplied)
1.5 N·m
{15 kgf·cm}
Screw (not supplied)
6 mm - 7 mm
Cord (not
supplied)
30 cm
10 cm
10 cm
10 cm
1 cm
Leave at least this space around the set.
30 cm
10 cm
10 cm
Leave at least this space around the set.
6 cm
Loading ...
Loading ...
Loading ...