Loading ...
Loading ...
Loading ...
The laminate mechanism creates a margin of
about 1" (25 mm) at the beginning of printing. You
can reduce this margin by printing labels
continuously.
You can also change the margin before and after
the text.
X [Full] / [Half] / [Narrow]
• The printed dots (:) indicate the end of the label.
Cut along the printed dots (:) with scissors.
When selecting Half and Narrow margins, a
mark will immediately follow the margin of about
1" (25 mm) indicating where to cut the label.
X [Chain Print] (Tape-saving option)
Use this option to print multiple labels with the
narrowest margins. This feature saves tape.
Select [
Chain Print
] for the margin.
This setting does not print dots (:) indicating the
end of the label. Use scissors to remove any part
of margin that is not required.
1. Enter the text.
2.
Press . The message [
Set 1-9?1
]
appears on the LCD.
3. Press the number keys to enter the amount
of copies you want to print.
4. Press to start printing.
5. Clear the text and re-enter the text you want
on the next label.
6. Repeat steps 2 through 5.
7. After the last label prints, feed the tape by
pressing and .
8. Press the Tape Cutter Lever.
NOTE
• Once the final label sheet prints, feed the tape
before pressing the Tape Cutter Lever ( +
), otherwise part of the text may be
cut off.
• Do not pull the tape, as this may damage the
Tape Cassette.
Setting Margins
[Margin]
[Full / Half / Narrow / Chain Print]
Ŷ When printing a single sheet:
Full
Half
Narrow
Ŷ When printing multiple sheets:
Full
Half
Narrow
abc
1"
(25 mm)
1"
(25 mm)
abc
:
1"
(25 mm)
0.47"
(12 mm)
0.47"
(12 mm)
abc
:
1"
(25 mm)
0.16"
(4 mm)
0.16"
(4 mm)
abc
1"
(25 mm)
1"
(25 mm)
1"
(25 mm)
1"
(25 mm)
:
abc
:
abc
:
:
abc
:
0.47"
(12 mm)
0.47"
(12 mm)
0.47"
(12 mm)
0.47"
(12 mm)
1"
(25 mm)
abc
:
:
abc
:
1"
(25 mm)
0.16"
(4 mm)
0.16"
(4 mm)
0.16"
(4 mm)
0.16"
(4 mm)
Loading ...
Loading ...
Loading ...