Loading ...
Loading ...
Loading ...
Rinse aid aus
11
2. Carefully pour rinse aid up
to the max. mark in the filler opening.
3. Close cover until it clicks shut.
4. To prevent excessive foam formation
during the next rinse cycle, remove
any rinse aid which has run over with
a cloth.
Setting amount of rinse aid
The amount of rinse aid dispensed can
be set in 4 stages. Accordingly 0, 1, 2
or 3 displays are lit.
Factory setting: 2.
Do not change the amount of rinse aid
unless streaks (select lower setting)
or water stains (select higher setting)
are left on the utensils.
1. Open the door.
2. Switch on ON/OFF switch (.
3. Hold down button > P and press
START button h until the setting
light )* and “Check water supply”
display )2 flash.
4. Release buttons.
5. Keep pressing button > P until
the rinse aid refill indicator )"
flashes.
The rinse aid refill indicator )"
flashes and the displays #
and + are lit (= Setting 2).
To change the setting:
1. Press the button < H until
the required setting has been
selected.
2. Press START button h.
The displays )* and )" go out.
The selected setting is saved.
3. Close the door.
PD[
$%&
6HWWLQJ
Loading ...
Loading ...
Loading ...