Loading ...
Loading ...
Loading ...
24
EEE
24
E
24
E
24
E
Product Care
24
Cleaning and Care
EXTERIOR
The outside surface is precoated metal and plastic. Clean
the outside with mild soap and water; rinse and dry with a
soft cloth. Do not use any type of household or abrasive
cleaner.
STAINLESS STEEL SURFACE
The exterior should be wiped often with a soft damp cloth
and polished with a soft dry cloth to maintain its beauty.
There are also a variety of products designed especially
for cleaning and shining the stainless exterior of the oven.
We recommend that the cleaner be applied to a soft cloth
and then carefully used on the stainless exterior rather
than sprayed directly on to it. Follow package directions
carefully.
FRONT SIDE OF THE OVEN
Wipe the window on both sides with a soft damp cloth
to remove any spills or spatters. Metal parts will be easier
to maintain if wiped frequently with a soft damp cloth.
Avoid the use of spray and other harsh cleaners as they
may stain, streak or dull the oven surface.
TOUCH CONTROL PANEL
If desired, the touch pads may be deactivated before
cleaning. See the Control Lock information on page 22
of this manual. Wipe the panel with a cloth dampened
slightly with water only. Dry with a soft cloth. Do not scrub
or use any sort of chemical cleaners. Close oven and
follow directions on page 22 for turning Control Lock off.
Press CLEAR.
INTERIOR
Cleaning is easy because no heat is generated to the
interior surfaces; therefore, there is no baking and setting
of spills or spattering. To clean the interior surfaces,
including oven sealing surfaces, wipe with a soft damp
cloth. DO NOT USE ABRASIVE OR HARSH CLEANERS OR
SCOURING PADS. For heavier soil, use mild soap; wipe
clean with a soft damp cloth. Do not use any chemical
oven cleaners.
ODOR REMOVAL
Occasionally, a cooking odor may remain in the oven. To
remove odor, combine 1 cup water with 1/3 cup lemon
juice in a 2-cup glass. Boil for several minutes. Leave in
the oven until water cools. Wipe interior with a soft cloth.
DRAIN WATER
In the event of excess water being in the Combi Steam/
Convect™ Oven engine or a steam function is interrupted
during operation, your oven may need to drain to reset
itself.
An ATTENTION message will be displayed alerting the
need for the oven to drain the water.
Ensure that there is an empty reservoir. If not, empty the
reservoir and replace.
The draining of the water into the reservoir will take
approximately 1 minute.
Once complete, detach the reservoir and discard the
water.
Loading ...
Loading ...
Loading ...