Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
21
T ROUBLESHOOTING
Combination of excessive detergent and soft
water.
Aluminum items rub dishes during cycle.
Coffee or tea soils
Rinse agent dispenser empty.
Power is not connected.
Fuse is blown out or circuit breaker is tripped.
The holes of spray arms is blocked by food
particles.
Rack is poorly adjusted.
Cloudiness on glassware
Black or gray marks on dishes
Yellow or brown film on inside
surfaces
Dishes don’t dry
The lamps don’t illuminate
Spray arms don’t rotate smoothly
Upper rack crooked after loading
Underload the dishwasher and use a rinse aid to minimize this
process.
Remove aluminum markings with a mild cleaner.
Eliminate the soil by using a stain removal product.
Check and refill the rinse agent if empty.
Connect power supply.
Replace fuse and repair circuit breaker.
Clean the holes of the spray arms.
Adjust the upper rack properly referring to page 12.
If you can’t fix problems with the above actions or you have different problems which are not mentioned in the manual,
please call LGE Customer Service at 1-888-542-2623.
Causes Recommended ActionsProblem
Water inlet trouble
Drainage trouble
Excessive water supplied
Water leakage trouble
Heater Circuit Failure
Thermistor trouble or very high inlet water
temperature. (over 194 )
IE Error
OE Error
FE Error
E1 Error
HE Error
TE Error
Check clogging of water inlet hose (or hose twist or freezing).
Check water supply.
Check clogging of water drain hose (or twist or freezing).
Please call your Authorized Service Center or
LGE Customer Service at 1-888-LG-CANADA(542-2623)
Loading ...
Loading ...
Loading ...