Loading ...
Loading ...
Loading ...
Installation
English 15
STEP 4 Install the custom panel (FBI models only (DDW24T999BB/DA))
A
1. Insert the supplied rubber skirt (A) into
the 3 holes at the bottom of the door.
Ø 2
10-12
2. Put the installation template on the
back of the custom panel and x it
temporarily using transparent tape.
Note that the rear of the custom panel
will be attached to the dishwasher door.
CAUTION
• The top end of the custom panel must
be aligned with the top end of the
installation template.
• Use a custom panel between 7 lbs and
20 lbs.
3. Pre-drill the 6 points marked on the
installation template using a 2-pi drill
bit to a depth of 10 -12 mm.
B
C
B
C
4. Remove the installation template and
tighten the custom panel xers (B) at
the top with 2 screws (C, Ø4 X 20) as
shown.
DACOR_DW9500M_DD68-00197A-01_EN.indd 15 2017-08-23 8:54:54
Loading ...
Loading ...
Loading ...