Loading ...
Loading ...
Loading ...
Note: This feature can be activated from the remote control ONLY, the unit must be in cool/eco mode.
To activate the remote sensing feature, point the remote control towards the unit and press the remote sensing button. Next, use
the “ ” buttons to set the desired temperature at the remote. (Note that the set temperature will only be displayed on the unit
itself ). The signal icon on the remote control will pulse each time it sends a signal. lt will periodically send this signal until the feature
is deactivated by pressing the remote sensing button. lf the unit does not receive the remote sensing signal during a maximum of 200
seconds interval, the unit will end remote sensing mode automatically.
The display on the remote control indicates the temperat
ure at the remote ONLY.
NOTE: The Remote Sensing function is terminated either by using the Remote Sensing button or the main ON/OFF button on the unit.
9
Operating Instructions
Operating Instructions
(continued)
.devreser sthgir llA.cnI ,stcudorP emoH xulortcelE 9002
TO CHANGE TEMPERATURE UNIT DISPLAY:
DO THIS:
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
Note: The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius.
YOU WILL SEE:
REMOTE SENSING FEATURE
(on some models)：
LIGHT pulsing ( On & Off intermittently ).
DO THIS:
PRESS REMOTE
NOTE: Remote display
is actual temperature
at remote control only
NOTE: Unit display shows the set temperature
If the display reads "AS" , a sensor has failed. Contact your
Authorized Frigidaire Service Center.
FAULT CODES:
SENSING BUTTON
On some models, if the display reads "ES", a sensor has failed.
Contact your Authorized Frigidaire Service Center.
Loading ...
Loading ...
Loading ...