Loading ...
Loading ...
Loading ...
Adjusting
50
MDrive
With MDrive you can configure several individ-
ual settings for your vehicle on the Control Dis-
play and activate them simultaneously with the
button on the steering wheel.
Configuring settings
With the ignition switched on you can change
the settings of MDrive on the Control Display.
iDrive, for explanation of principle, refer to
page 16.
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
4. Select "Vehicle / Tires" and press the con-
troller.
5. Change to upper field if necessary. Turn the
controller until "MDrive" is selected and
press the controller.
The functions contained in MDrive are dis-
played:
> "SMG Drivelogic"
Sequential Manual Transmission with
Drivelogic: shifting modes and Drivel-
ogic driving programs, refer to page 60
> "EDC"
Programs of the Electronic Damping
Control, refer to page 82
> "DSC"
Dynamic Stability Control and
M Dynamic Mode, refer to page 80
> "POWER"
Programs of the M Engine Dynamic
Control, refer to page 61
> "Active seat back"
*
Programs of the active backrest width
adjustment, refer to page 43
> "Head-Up Display"
*
Views of the Head-Up Display, refer to
page 88
You can reset all settings for MDrive to their
default values:
> "Reset to default"
6. Select the desired function.
7. Press the controller.
8. Turn the controller to select the desired set-
ting.
"Unchanged" retains the current setting
made outside of MDrive.
9. Press the controller.
Online Edition for Part no. 01 41 0 012 754 - © 08/06 BMW AG
Loading ...
Loading ...
Loading ...