1
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardwares.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
ASSEMBLY INSTRUCTIONS
ITEM NO:651
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
Email: [email protected]
www.dreamonme.com
651
Dream On Me Zander Toddler Day Bed
2
Scan the QR code to register your product
https://dreamonme.com/customercare/registration/
3
WARNING !
· FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH.
· READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS
FOR FUTURE USE.
· UPON COMPLETION OF ASSEMBLY, MAKE SURE ALL SCREWS,BOLTS AND
FASTENERS HAVE BEEN SECURELY TIGHTENED.
A FREQUENT AND PEDRIODICALLY CHECK SHOULD BE MADE TO CONFIRM ALL
THE SCREWS AND NUTS REMAIN TIGHT.
· NEVER USE THIS PRODUCT IF THERE ARE ANY LOOSE, MISSING FASTENERS,
LOOSE JOINTS,BROKEN PARTS, OR TORN MESH/FABRIC.CONTACT DREAM ON ME
· NEVER SUBSTITUTE PARTS, THE PRODUCT INCLUDING SIDE RAILS,MUST BE
FULLY ERECTED PRIOR TO USE.
· NEVER USE BED FOR INFANTS, THIS TODDLER BED IS NOT A SUBSITITUTE FOR A
CRIB,THE TODDLER BED IS USED FOR A CHILD BETWEEN THE AGE OF 15MONTHS
TO 5 YEARS WITH A MAXIMUM WEIGHT OF 50 POUNDS(22.7KG).
· NEVER USE PLASTIC SHIPPING BAGOR OTHER PLASTIC FILM AS A MATTRESS
COVERS NOT SOLD AND INTENDED FOR THAT PURPOSE,THEY CAN CAUSE
SUFFOCATION.
· CAUTION ENTRAPMENT HAZARD:TO AVOID DANGEROUS GAPS,ANY MATTRESS
USED IN THIS BED SHALL BE FULL SIZE CRIB MATTRESS AT LEAST 51-5/8IN
(1310MM) IN LENGTH, 27-1/4IN(690MM) IN WIDTH AND 4IN(100M) IN THICKNESS,OR
GREATER,BUT NOT EXCEED 5IN.
· NEVER USE A WATER MATTRESS WITH THIS TODDLER BED.
· WARNING STRANGULATION HAZARD:STRINGS CAN CAUSE STRANGULATION!
NEVER PLACE BED NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES
MAY STRANGLE A CHILD.NEVER SUSPEND STRINGS OVER BED.
NEVER PLACE ITEMS WITH A STRING CORD,OR RIBBON,SUCH AS HOOD STRINGS,
PACIFIER CORDS AOUND A CHILS’S NECK.THESES ITEMS MAY CATCH ON BED
PARTS.
· WARNING: INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
OPENINGS IN AND BETWEEN BED PARTS CAN ENTRAP HEAD AND NECK OF A
SMALL CHILD. NEVER USE BED WITH CHILDREN UNDER 15MONTHS.ALWAYS
FOLLOW THE ASSEMBLY INSTRUCTIONS.
· TO REDUCE THE RISK OF SIDS,PEDIASTRICIANS RECOMMED HEALTHY INFANTS
BE PLACED ON THEIRE BACK TO SLEEP,OR ADVISED BY YOUR PHYSICIAN.
· DO NOT USE BED IF THE SPACE BETWEEN BED AND SOLID OBJECTS IS LESS
THAN 12IN(31CM), A CHILD COULD SLID INTO THE SPACE AND SUFFOCATE.
· IF REFINISHING,USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.
TO WASH,CLEAN WITH MILD SOAP AND DAMP CLOTH.
TO STORE,PLEASE KEEP IN A COOL PLACE.
MADE IN CHINA
1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854 732-366-1788 FOR
REPLACEMENT PARTSAND INSTRUCTIONAL LITERATURE IF NEEDED.
P
P
4
1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854 732-366-1788.
5
COMPONENT PARTS
(A) Headboard (1pc)
(B) Footboard (1pc)
(C) Back Rail (1pc)
(D)Left Leg (1pc)
(E) Right Leg(1pc)
(H2) Cross Bar (8pcs)
(F) Bed Rail (1pc)
D
E
(G) Side Bar (1pc)
(H1) Cross Middle Bar (1pc)
6
STEP 1
HARDWARE AND TOOL DIAGRAM
(a) Bolt 2-5/8” (5pcs)
(b) Bolt 2-1/5” (10pcs)
(c) Barrel nut (15pcs)
(d) Allen Wrench (1pc)
(e) Bolt 1-3/5’ (2pcs)
Connect the side bar (G) to the left leg
(D) and the right leg (E) using barrel nuts
(c) and bolts (a).Make sure that the
hole on the side bar(G) are facing up,
and nearer the left leg(D).
PHILLIPS--HEAD SCREWDRIVER
REQUIRED FOR ASSEMBLY
----NOT INCLUDE
Do Not Use Power Drills or Drivers
E
D
c
c
c
c
a
a
G
7
STEP 2
STEP 3
Connect the headboard (A) and the
footboard (B) to the back rail (C) using
barrel nuts (c) , bolts (b) .
Connect Cross middle bar (H1) to the back
rail (C) using barrel nut (c) and bolt (b).
Attach cross bar (H2) to the back rail (C).
Please note: the cross end should fit into
hole.
A
B
C
c
c
c
b
b
b
b
b
C
c
H1
H2
H2
H2
H2
H2
H2
H2
H2
8
STEP 4
STEP 5
bar (G) using barrel nut (c) and bolt (b).
Attach cross bar (H2) to the side rail (G).
Please note: cross bar end should fit into
hole.
Then connect the headboard (A) to the
left leg (D) and connect the footboard
(B) to the right leg (E) using barrel nuts (c)
bolts(b) .
Connect the bed rail (F) to the left leg
(D) using the barrel nut (c) and the bolt
(a) and bolt (e).Then connect the bed
rail (F) to the side bar (G) using the bolt
(e) as shown.
H1
H2
H2
H2
H2
H2
c
c
c
c
A
B
D
E
G
b
b
b
b
a
D
F
c
G
e
e
Connect Cross middle bar (H1) to the side
b
9
Congratulations , your toddler bed with drawer is ready to use .
10
LIMITED WARRANTY
workmanship and agrees to remedy any such defect.
This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
rights which vary from State to State.
WARNING: Should this product become damaged, and/or components
are broken or missing, DO NOT USE
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.
1532, S. Washington Avenue
Piscataway, NJ 08854
E-mail: [email protected]
www.dreamonme.com
Follow us on
to get your nursery featured on our social media.
@dreamonmeinc
@dreamonmeinc
