Loading ...
Loading ...
Loading ...
Part Number:
221C8395P004,
rev.
0
kit and assemble it on the opposite side. To
aach it, use the screws that you just took out
(step 5b).
6. Reinstall the hinges and doors
a) Place the washer on the post
of the boom hinge.
b) Locate the two Torx screws
that are on the middle part of the
cabinet. Take them out and re-
mount them on the opposite side.
c) Mount the refrigerator door
on the boom hinge being careful
that the middle hinge axis coin-
cides with the door hole.
d) Insert the middle hinge in the up-
per hole of the door.
Note. When assembling on
the opposite side, the mid-
dle hinge must turn as indi-
cated in the diagram.
e) Insert the remaining
screws and tighten firmly.
7. Reinstall the freezer door
a) Place the washer on
the post of the middle
hinge.
b) Mount the freezer
door on the middle hinge
being careful that the
hinge axis coincides with
the door hole.
c) Locate the hinge in
the kit and insert the post
in the top hole of the door.
d) Before tightening
the top hinge screw, be sure the
top part of the door is level in
relation to the cabinet stopper.
The space between the two doors
must be equal all the way down.
e) Insert the remaining screws
and tighten firmly.
f) Locate the hinge cover that
comes with the kit and put it
in place.
Important: When reinstalling the hinges, be
sure to use the same number of screws, spac-
ers and washers as were used originally.
When finished, only the following items
should be let over from the original assembly:
the top hinge cover, the top hinge and the met-
al stopper from the refrigerator door.
Check the door seals. Be sure that there are
no spaces between the seal and the cabinet. If
there is an opening, try stretching the seal.
3. Remove the boom hinge
a) Ask someone to tilt the refrigerator back-
wards until you are able to unscrew the boom
hinge screws.
Do not lay the refrigerator down.
b) Remove the screw from the
hinge and dismount the post.
Remount it on the other side of
the hinge.
c) Remove
the two leveling
screws.
d) Take out the three
screws that hold the
boom hinge on.
e) Remove the
screws that aach
the bracket to the
leveling screws.
f) Assemble the bot-
tom hinge and the
bracket on the opposite side to where
they were originally.
g) Put the leveling screws back and straighten
the unit.
4. Prepare the freezer door
a) Remove the inside bearing
from the top part and assemble it
on the opposite side.
b) Turn the door in such a way
that the boom part is facing up-
wards and take out the
stopper screws.
c) Remove the bearing
from the boom hole and
assemble it on the oppo-
site side.
d) Assemble the stopper
and screws on the opposite side of
the door.
5. Prepare the
refrigerator door
a) Remove the in-
side bearing and re-
assemble it on the
opposite side.
b) Turn
the door
in such a way that the
boom part is facing up-
wards and take out the
stopper screw.
c) Remove the bearing from
the boom part and reassem-
ble it on the opposite side.
d) Look for the opposite
stopper that comes with the
How to Reverse the Refrigerator Door
For your convenience, the door of this refrig-
erator can be installed on either side. These in-
structions explain how to change the hinge from
the right side to the le side or vice versa.
Before You Start
Read the instructions all the way through.
Unplug the refrigerator from the electrical
outlet.
Empty the refrigerator.
Get someone to help you. You will need help
for some steps in the process.
Tools Required
• /″ (7.9 mm) socket or
hex screwdriver bit
• ½″ (1.7 mm) socket or
hex screwdriver bit
• Flat-head screwdriver
• Phillips-head screw-
driver
• Torx T20 screwdriver
• Adhesive tape
Steps
1. Remove the top hinge
a) Close the freezer door and tape
it shut.
b) Use the flat-head screwdriver
to take off the hinge cover.
c) Remove the screws from the
hinge.
d) Li up the hinge. The post
should come out completely
from the door hole.
e) Take off the tape. Tilt the door
in such a way that it comes off of the
cabinet and carefully li it until it is
free of the boom axis.
f) Put the door in a safe place so that it does
not fall, get scratched or banged.
2. Remove the middle hinge
a) Secure the refrigerator door with adhesive
tape.
b) On the middle hinge you
will find a spacer washer. Take
it off and keep it with the rest
of the parts.
c) Take the screws out of the
hinge and the aached spacer.
Dismantle the middle hinge.
d) Take off the tape. Tilt the
refrigerator door and take it
off in the same way as the freez-
er door.
e) Remove the spacer washer of
the boom hinge and put it with the rest of the
parts.
f) Put the door in a safe place so that it does
not fall, get scratched or banged.
a
c, d, e and f
d and e
b
a
b
c
b
a
d and e
b and c
b, c and d
b
Sirius