Brief Description
Neuroblast Motus is a portable wireless motion controller. It is powered by a 5V Li-ion
battery and communicates solely via Bluetooth, enabling real-time tracking of limb
movements
MOTUS– Technical Specication
.
Technical Data
Parameter
Product Name
Intended Use
Dimensions
Weight
Material
Battery Type
Specication
MOTUS
Motion tracking for [e.g.] 70 mm x 40 mm x 20
mm
[e.g.] 100 g (approx.)
ABS plastic housing (fully plastic enclosure)
Rechargeable Li-ion battery, 5V
Parameter
Specication
Battery Capacity
[e.g.] 750 mAh (replace with actual value)
Charging
Via micro USB / USB-C cable (replace with actual port)
Typical Charge Time [e.g.] 2 hours
Operating Time
[e.g.] 3–5 hours (depending on usage)
Wireless Connectivity Bluetooth (2.4 GHz band)
Operating Temperature
[e.g.] +10 °C to +40 °C
Storage Temperature [e.g.] 0 °C to +45 °C
Certications
Key Features
• Wireless Motion Tracking: Integrated sensors (e.g., accelerometer and
gyroscope) enable real-time monitoring of movement.
• Lightweight and Portable: Fully plastic enclosure for minimal weight and
comfortable handling.
• Battery Powered (5V Li-ion): Built-in rechargeable battery allows for multiple
hours of continuous use.
• Bluetooth Connectivity Only: Simple, reliable wireless communication with a
smartphone, tablet, or PC.
• Ergonomic Design: Shaped for easy attachment to limbs with straps or hand-
held use.
Additional Notes
• Charging: Use only the provided or a compatible 5V charger and cable.
• Maintenance: Wipe external surfaces gently with a soft, damp cloth. Do not
immerse in water.
• Storage: Store in a clean, dry place at room temperature when not in use.
• Safety: Avoid exposure to extreme heat or direct sunlight. Discontinue use if the
enclosure is cracked or the device malfunctions.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
l Reorient or relocate the receiving antenna.
l Increase the separation between the equipment and receiver.
l Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
l Consult the dealer or an experienced radio/TV technician for help
The device must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
