
INSTRUCTION MANUAL
RADIANT HEATER
MODEL NUMBER: COH40006
ITEM NUMBER: P03-UR15B
08/2024
DO NOT RETURN THIS ITEM TO THE STORE
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Should you encounter problems after following all the steps herein contained please contact our Customer Support:
Call 1-888-227-3340 or email: customerservice@dekoliving.com. Kindly provide the model number, place and date of purchase and a
short description of the problem.
LIMITED WARRANTY This product has a 1 year Limited Warranty. This warranty is limited to the replacement of defective parts only.
Labor charges and/or damage incurred during installation, repair, replacement as well as incidental and consequential damages
connected with the above are excluded. Any damage to this product as a result of neglect, misuse, accident, improper installation or
use other than the purpose SHALL VOID THIS WARRANTY
Please read and understand this entire manual before attempting to assemble, operate or install the product. Failure
to follow the dangers, warnings and cautions contained in this owners manual may result in a fire or explosion causing
damage to property, serious bodily injury or death
Thank you for purchasing your new
RADIANT HEATER

For Indoor Use Only
(inside any enclosure)
WARNING
FOR YOUR SAFETY
1) Improper installation, adjustment, alteration,
service or maintenance can cause injury or
property damage.
2) Read the installation, operation, and
maintenance instructions thoroughly before
installing or servicing this equipment.
3) Failure to follow these instructions could
result in fire or explosion, which could cause
property damage, personal injury or death.
Installer: Leave these instructions with the
consumer.
Consumer: Keep these instructions for
future reference.
1. Read all instructions before using this unit.
2. DO NOT leave this unit unattended when in use.
3. This heater will get hot when in use. Do not touch hot
surfaces.
4. Caution: Some parts of this product can become
very hot and cause burns. Particular attention has to
be given when children and vulnerable people are
present.
5. DO NOT move the unit when in use. Wait until the
heater is completely cool before moving and check
that it has been unplugged from the power supply.
6. Position the unit at least 1m away from highly
combustible materials such as furniture, trees, leaves,
dry grass and bushes.
7. The heater must be a minimum of 1.8m away from
the ground and a minimum of 0.5m away from the
ceiling of a building or overhanging items.
8. The heater must not face with the heating element
pointing upwards towards a ceiling. The heater
element must be facing the area it is to heat.
9. WARNING: In order to avoid overheating do not cover
the heater. It is not for drying clothes.
10. Keep children and pets at a safe distance from the
unit.
11. This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
12. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without supervision.
13. DO NOT operate the heater if any signs of damage or
malfunction manifest themselves.
14. DO NOT attempt to repair or adjust any electrical or
mechanical functions on this unit. The unit does not
contain any user serviceable parts. Only a qualified
electrician should perform servicing or repairs.
Attempting to repair the unit yourself will void your
warranty.
15. If the power cable is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
16. DO NOT handle the element with bare hands. If it is
inadvertently touched, remove finger marks with a
soft cloth and methylated spirits or alcohol, otherwise
the marks will burn into the element causing
premature heater failure.
17. DO NOT replace or attempt to replace the element in
this product.
18. This product is suitable for indoor and outdoor use.
Do not use this heater in the immediate surroundings
of a bath, shower or swimming pool.
19. This product must not be left outdoors exposed to
the elements for long periods of time.
20. DO NOT touch the plug with wet or damp hands.
21. DO NOT run the power cable under carpeting.
22. DO NOT cover the power cable with rugs, runner, or
similar coverings. Arrange the power cable away from
foot traffic and where it will not be tripped over.
23. DO NOT wind the power cable around the unit.
24. DO NOT insert or allow foreign objects to enter any
ventilation or opening on the heater, as this may
result in electric shock, fire, or damage to the heater.
25. To prevent a possible fire, do not block the air vents.
26. A heater has hot and arcing or sparking parts inside.
Do not use in areas where petrol, paint, explosive and/
or flammable liquids are used or stored. Keep unit
away from heated surfaces and open flames.
27. Where possible, avoid the use of an extension cable
as this may overheat and cause a fire. However, if you
have to use an extension cable, ensure it is suitable
for the purpose, has been tested for outdoor use and
preferably has an RCD device fitted or attached.
28. Always ensure the heater is plugged into a suitable
socket, one that is tested for outdoor use.
29. To disconnect heater, turn controls to OFF, then
remove plug from socket. Do not unplug by pulling
on the power cable.
30. Always unplug the unit and ensure the unit is
completely cold before moving, cleaning or storing.
31. This heater is intended for domestic use only and
should not be used commercially for contract
purposes. Any alternative use, not recommended by
the manufacturer, may result in fire, electric shock, or
injury to persons.
32. The use of attachments on the heater is not
recommended
33. WARNING: This heater is not equipped with a device
to control the room temperature. Do not use this
heater in small rooms when occupied by persons
not capable of leaving a room on their own, unless
constant supervision is provided.
34. Check exterior walls for areas of damage before
installing the heater.
35. Always use on a dry, suitably strong, stable, flat and
level surface.
36. Check exterior walls for communication and electrical
cables and pipelines. Should any service lines be
present in the immediate vicinity do not install your
heater, find an alternative location to install this
product.
37. DO NOT position directly above or below an electrical
socket.
38. DO NOT remove any of the warning stickers or signs
from the product.
ALL ABOVE MUST BE EXACTLY FOLLOWED.

Components Assembly
Before installation, please pay attention to below notes
• Products should be put down gently.
• Acid and alkali environment installation is not recommended.
• The product must be grounded.
• The product was required to check the product brand mark on the voltage and the local voltage whether conform.
• For the safe use of the product, the product installation position should guarantee the bottom minimum height of
1.8 m from the ground, ceiling, roof, or other coverings minimum distance is 0.5 m, minimum distance with both
sides wall is 0.5 m.
• Please empty the packing box thoroughly, and make sure that there are no missing parts.
• DO NOT plug the unit in until the unit is completely assembled. Make sure there is no damage to the unit and
power cord.
• Ensure the power rating should have sufficient current carrying capacity.
ASSEMBLY
MAKE SURE THE HEATER IS NOT FUNCTIONING BEFORE
YOU HANG IT ON A GAZEBO, OR UNDERNEATH A BALCONY
OR A ROOF.
1. Wrap the chain around the square pipe to secure it
2. Pass the chain around a fixed post, beam, or any fixed
object to secure it.
3. Connect the heater to an AC 230V/50 Hz wall outlet.
NOTE: Wait until the heater’s heating element has cooled
down before moving it.
Component description
1. Fixed beam
2. Chain
3. Square pipe
4. Remote control receiver
5. Main body
6. Switch
7. Telecontroller
Operating Instructions - Remote Control
1. Turn on the switch, ID 6
2. Use remote control to control gear or standby
POWER: Turn on or standby
P1 Cheap to run 600W
P2 Intermediate run 900W
P3 High-grade run (1500W)

The symbol below
is on the product or in the instruction manual.
This means that your electrical or electronic
equipment should be disposed at the end of its life
separately from your household waste.
There are separate collection systems
for recycling in the your local area.
For more information,
please contact the local authority or
your retailer where you purchased the product.
Specifications
Maintenance
Attention! Careful and regular maintenance of Infrared Heater is required to maintain a long and efficient
operation of your appliance.
• Check the cleanliness of the Reflector and IR-Filament at least once a month. If necessary, apply
cleaning and maintenance instructions.
• The number of checks may be increased considering the amount of the dust in the environment.
• Check the shape of the heater, inner wire and appearance while cleaning the appliance. If any problem
with heater please contact professionals.
• Check the cable and plug while cleaning the heater. If any problem with heater please contact
professionals.
• It is recommended to replace the mirror every two years to improve the operating efficiency.
Cleaning
Attention! Regular and careful cleaning helps your Infrared Heater operate for longer years and more
efficiently.
• For your safety, make sure the power is off before cleaning your appliance.
• Use a slotted screwdriver to remove the front grille from the frame’s entrance.
• For your safety, make sure the power is off and the power cable plug must be unplugged.
• Reflectors and filaments must be cleaned with soft cloth,smooth brush. Cleaner should not too wet and
could moist, the cleaner should not contain any chemicals.
• Avoid using cleaning tools(cleaners, etc.) that can damage reflectors.
• Insert a wire grid with a slotted screwdriver.
Voltage: AC 120V
Frequency: 60Hz
Electric Power : 1500W
