INSTALLATION INSTRUCTIONS
QuadPLUS
®
Polymer Shelf Mats
EG9889 Revised 02/24
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING
CARRIER FOR ANY DAMAGE. SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
INSTRUCTION SHEET
#A226458
BEFORE ASSEMBLY, PLEASE READ:
• For clarity, this instruction shows QuadPLUS
®
polymer mats being assembled to a wire truss frame.
• QuadPLUS
®
can be affixed to standard wire shelves as well.
• It is recommended to assemble truss frames and/or shelves onto posts—and to secure frame and/or shelf by tapping
with a mallet—BEFORE installing polymer mats. IMPORTANT: DO NOT HIT TRUSS FRAMES AND/OR SHELVES AFTER
POLYMER MATS HAVE BEEN INSTALLED! Remove polymer mats before readjusting truss frame.
Note: Notches
in end mats
allow for
posts.
This instruction is used with #A200815 “Wire Shelving” instructions.
wire truss frame
end
mats
mid
mats
wire truss
frame
mat to be
lowered
into place
post
notch in
end mat
Step 1 - Position polymer mats onto wire truss frame or shelf accordingly (‘wire truss frame’ option shown).
Step 2 - Gently push each mat down along the
front and rear to snap them into place.
mats
in place
(End)
DO NOT USE TOOLS TO
INSTALL POLYMER MATS!
IMPORTANT!
Eagle Foodservice Equipment, Eagle MHC, and SpecFAB
®
are divisions of Eagle Group. ©2024 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A.
• Phone: 302/653-3000 • 800/441-8440 • Fax: 302/653-2065
• www.eaglegrp.com • www.eaglemhc.com
