PLUS
P5000PLUS(US)V1.0
14
8
10
12
15
53KG
AC1:120V
1800W (Max)
AC2:120V
1800W (Max)
AC3:120/240V
3600W (Max)
120V/1800W
240V/3200W
AC1
• The maximum output power of the combination of
ports AC1, AC2, and AC3 is 3600W.
• AC1 port output voltage 120V, maximum output power
1800W.
• AC2 port output voltage 120V, maximum output power
1800W.
• The AC3 port can output 120V or 240V voltage depending
on the wiring method, with a maximum output power of
3600W.
AC2
AC3
240V
120V
120V
12V/10A
12-60V/18A(MAX)
3600W
100/110/120V
100-120V,200-240V.
100-120V,the maximum charging power is 1800W
200-240
V,the maximum charging power is 3000W.
60V.
60V,
the maximum current of AC output is 15A, and when the AC output exceeds 15A, the UPS icon
flashesIndicates overload while the AC icon turns off output interrupt.
60V)
60V
120V/1800W,240V/3000W
120V/240V,3600W Max
12-60V/18A,1000W Max
5-20V/5.0A,100W Max with PD3.0 protocol *2
P5000PLUS
53KG
AC output rated power is 3600W. The corresponding load
power of the product.
product should be less than the rated output
12. What is the maximum output power of a single AC interface?
Each interface of the product has a maximum output current marked, and the maximum output
power of the interface can be calculated according to the local output voltage and maximum
current. The load power cannot be greater than the maximum output power that a single interface
can withstand. Failure to do so will result in damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using this product, basic precautions should always be followed, including
the following:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary when the product is used near children.
c) Do not put fingers or hands into the product.
d) Use of an attachment not recommended or sold by power pack manufacturer may result in a risk of fire, electric
shock, or injury to persons.
f) Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk of injury.
g) Do not operate the power pack with a damaged cord or plug, or a damaged output cable.
h) Do not disassemble the power pack, take it to a qualified service person when service or repair is required.
Incorrect reassembly may result in a risk of fire or electric shock.
i) To reduce the risk of electric shock, unplug the power pack form the outlet before attempting any instructed
servicing.
j) WARNING – RISK OF EXPLOSIVE GASES.
1) WORKING IN VICINITY OF A LEAD ACID BATTERY IS DANGEROUS. BATTERIES GENERATE
EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF THE
UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE
POWER PACK.
2) To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer and
manufacturer of any equipment you intend to use in vicinity of the battery. Review cautionary marking on these
products and on engine.
k) PERSONAL PRECAUTIONS
1) Consider having someone close enough by to come to your aid when you work near a lead-acid battery.
2) Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
3) Wear complete eye protection and clothing protection. Avoid touching eyes while working near battery.
4) If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately
flood eye with running cold water for at least 10 minutes and get medical attention immediately.
5) NEVER smoke or allow a spark or flame in vicinity of battery or engine.
SAVE THESE INSTRUCTIONS
6) Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit battery or
other electrical part that may cause explosion.
7) Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid
battery. A lead-acid battery can produce a short-circuit current high enough to weld a ring or the like to metal,
causing a severe burn.
l) When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way.
m) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
n) Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 130°C may
cause explosion. The temperature of 130°C can be replaced by the temperature of 265°F.
o) Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure
that the safety of the product is maintained.
p) Attach output cables to a battery and chassis as indicated below. Never allow the output clamps to touch one another.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance
20cm between the radiator and your body: Use only the supplied antenna.
